Sony DSC-T300/R Cyber-shot® Handbook (Large File - 13.9 MB) - Page 130
Touch panel, The paint pen operation reacts at inappropriate points.
View all Sony DSC-T300/R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Troubleshooting Printing is canceled. • Confirm that you have disconnected the cable for multi-use terminal before the (PictBridge Connecting) mark disappears. Cannot insert the date or print images in the index mode. • The printer does not provide these functions. Consult the printer manufacturer as to whether the printer provides these functions or not. • The date may not be inserted in the index mode depending on the printer. Consult the printer manufacturer. is printed on the date-inserted part of the image. • The image does not have the recording data so the date cannot be inserted. Set [Date] to [Off] and print the image again (page 116). Cannot select the print size. • Consult the printer manufacturer as to whether the printer can provide the desired size. Cannot print the image at the size selected. • When you use paper of a different size after connecting the printer to the camera, disconnect and then reconnect the cable for multi-use terminal. • The print setting of the camera differs from that of the printer. Change the setting of either the camera (page 116) or the printer. Cannot operate the camera after canceling printing. • Wait for a while as the printer is carrying out the cancellation. It may take some time depending on the printer. Touch panel Cannot operate the touch panel buttons correctly or fully. • Perform [Calibration] (page 85). • [Housing] is set to [On] (page 85). The paint pen operation reacts at inappropriate points. • Perform [Calibration] (page 85). 130