Sony DSX-S310BTX Operating Instructions - Page 31
Searching by alphabetical order - Alphabet search - reset
View all Sony DSX-S310BTX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
3 Press the multi-way encoder. The display returns to the Quick-BrowZer mode and the selected item appears. 4 Push the multi-way encoder up/down to select the desired item, then press it. Playback starts if the selected item is a track. To cancel Jump mode Press (BACK) or push the multi-way encoder left. A list of the search categories appears. Searching by alphabetical order - Alphabet search When an iPod or USB device containing song information is connected to the unit, you can search for a desired item by alphabetical order. While this unit is reading song information, " " appears on the display. You can use the Alphabet search function when " " disappears. For a USB device, the maximum number of searchable files (tracks) is 5,000. 1 Push the multi-way encoder right in Quick-BrowZer mode. An alphabet list appears. 2 Rotate the multi-way encoder to select the first letter of the desired item, then press it. A list of items in the selected category appears in alphabetical order. If there is no song beginning with the desired letter, "Not Found" appears. 3 Push the multi-way encoder up/down to select the desired item, then press it. Playback starts if the selected item is a track. To cancel Alphabet search Press (BACK) or push the multi-way encoder left. A list of the search categories appears. Notes • For a USB device, it may take time to read song information after connecting to the unit. While reading song information, " " appears in the top left of the display. • Only the song information of the USB device last connected can be stored. • If replacing the car battery, changing connections or resetting the unit, the stored song information will be erased. Searching a track by listening to track passages - ZAPPIN™ While playing back short track passages in a USB device in sequence, you can search for a track you want to listen to. ZAPPIN mode is suitable for searching for a track in shuffle or shuffle repeat mode. 1 Press (ZAP/SHUF) during playback. After "ZAPPIN" appears in the display, playback starts from a passage of the next track. The passage is played for the set time, then a click sounds and the next passage starts. Track (ZAP/SHUF) pressed. The part of each track to playback in ZAPPIN mode. 2 Press the multi-way encoder or (ZAP/SHUF) when a track you want to listen is played back. The track that you select returns to normal play mode from the beginning. To search a track by ZAPPIN mode again, repeat steps 1 and 2. In the case of "SensMe™ channels" playback If the track being searched is transferred by "Content Transfer," the most melodic or rhythmical sections* of tracks are played. For details on the SensMe™ function, see page 22. * May not be detected correctly. Tips • You can select the playback time from about 6 seconds/15 seconds/30 seconds (page 43). You cannot select the passage of the track to playback. • Push the multi-way encoder left/right in ZAPPIN mode to skip a track. • Push the multi-way encoder up/down in ZAPPIN mode to skip album. 31