Sony DSX-S310BTX Operating Instructions - Page 36
Preset dial, Voice dial activation, SMS indicator, Deleting from the phonebook in
View all Sony DSX-S310BTX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
• Before receiving phonebook data, disconnect any cellular phone or audio device. • To cancel the transfer of phonebook data, operate the cellular phone. • If the power supply lead is disconnected, the stored phonebook data will be erased. Deleting from the phonebook in this unit 1 Press (SOURCE/OFF) repeatedly until "Bluetooth Phone" appears. 2 Press (BROWSE). The phonebook appears. 3 Rotate the multi-way encoder to select an initial from the initial list, then press it. 4 Rotate the multi-way encoder to select a name from the name list, then press it. 5 Rotate the multi-way encoder to select "Delete Contact" from the number list, then press it. 6 Rotate the multi-way encoder to select "Yes," then press it. To clear all phonebook data, select "Delete All" in step 3. After clearing, confirm that all phonebook data has been cleared properly. Preset dial Contacts (up to 6) of the phonebook in a cellular phone can be stored in the preset dial. 1 Press (SOURCE/OFF) repeatedly until "Bluetooth Phone" appears. 2 Push the multi-way encoder up/down to select the preset number ("Preset 1" to "Preset 6") to store. 3 Push the multi-way encoder right to enter storing mode. "Waiting..." appears. 4 Send the phonebook data by operating the cellular phone. The contact is stored in the selected preset number. Voice dial activation You can activate voice dialing with a cellular phone connected to this unit by saying the voice tag stored on the cellular phone, then make a call. 1 Press (SOURCE/OFF) repeatedly until "Bluetooth Phone" appears. 2 Press the multi-way encoder. "Please say the name..." appears. 3 Say the voice tag stored on the cellular phone. Your voice is recognized, and the call is 36 made. Notes • Check that unit and cellular phone are connected beforehand. • Store a voice tag on your cellular phone beforehand. • If you activate voice dialing with a cellular phone connected to this unit, this function may not work in some cases. • Noises such as the engine running may interfere with sound recognition. In order to improve recognition, operate under conditions where noise is minimized. • Voice dialing may not work in some situations, depending on the effectiveness of the cellular phone's recognition function. For details, see the support site. • Do not use voice dialing on the cellular phone during handsfree device connection. Tips • Speak in the same way as you did when you stored the voice tag. • Store a voice tag while seated in the car, via this unit with Bluetooth Phone source selected. SMS indicator While connecting a cellular phone to this unit, the SMS indicator informs you of any incoming or unread SMS messages. If you receive a new SMS message, the SMS indicator flashes. If there are any unread SMS messages, the SMS indicator stays lit. Note Function of the SMS indicator may depend on the cellular phone.