Sony DSX-S310BTX Operating Instructions - Page 42
DM+ Advanced, Using rear speakers as subwoofer - Rear Bass Enhancer - bluetooth setup
View all Sony DSX-S310BTX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
DM+ Advanced DM+ Advanced improves digitally compressed sound by restoring high frequencies lost in the compression process. This function works when the USB, SensMe™, Pandora USB, Bluetooth Audio or Bluetooth Pandora source is selected only. 1 During playback, press the multi-way encoder. 2 Rotate the multi-way encoder until "DM+ Advanced" appears, then press it. 3 Push the multi-way encoder up/down to select "on," then press it. 4 Press (BACK). The display returns to normal reception/play mode. Tip Adjusted DM+ settings can be memorized separately for USB (SensMe™, Pandora USB) and Bluetooth Audio (Bluetooth Pandora) sources. Using rear speakers as subwoofer - Rear Bass Enhancer Rear Bass Enhancer enhances the bass sound by applying the low pass filter setting (page 39) to the rear speakers. This function allows the rear speakers to work as a subwoofer if one is not connected. 1 During reception/playback, press the multi-way encoder. 2 Rotate the multi-way encoder until "Rear Bass Enhancer" appears, then press it. 3 Push the multi-way encoder up/down to select from "Level 1," "Level 2" or "Level 3," then press it. 4 Press (BACK). The display returns to normal reception/play mode. Compensating volume level - Dynamic Loudness "Dynamic Loudness" refers to compensating for volume level and signal gain. 1 During reception/playback, press the multi-way encoder. 2 Rotate the multi-way encoder until "Dynamic Loudness" appears, then press it. 3 Push the multi-way encoder up/down to select "on," then press it. 4 Press (BACK). The display returns to normal reception/play mode. Adjusting setup items - MENU 1 Press and hold the multi-way encoder. 2 Rotate the multi-way encoder to select the desired menu item, then press it. 3 Push the multi-way encoder up/down to select the setting, then press it. The setting is complete. 4 Press (BACK). The setting is complete and the display returns to normal reception/play mode. The following items can be set (follow the page reference for details): Setup Clock Adjust (page 8) CT (Clock Time) (page 19) Beep Activates the beep sound: "on," "off." RM (Rotary Commander) Changes the operative direction of the rotary commander controls: "NORM," "REV." Auto Off Shuts off automatically after a desired time when the unit is turned off: "NO," "30sec (seconds)," "30min (minutes)," "60min (minutes)." DEV Inside Alert Activates the Device Inside Alert function: "off," "on." 42