Sony FWD-32LX1 Mounting Bracket Instruction Manual - Page 10

SFM2 Attaching the Display to the Backplate NOTE: For clarity purposes, the following illustrations will be shown without the adapter plate and display attached. This must be done to show how the positioning of the backplate cover and the backplate relate to each other (connection-wise). 1. The flange opening must be facing up. 2. Raise the flat panel with the front plate attached and slide the top flange opening to the flange on the backplate (Figure 7). 3. Slide the monitor down slowly. Make sure the backplate flange captures the frontplate top flange opening before letting go of the monitor. Slide down and push in (Figure 8). 4. To secure the two plates, tighten the two (2) M6 x 12 (mm) security screws using a long Phillip head screwdriver (Figure 9). Flange Opening (Slot opening on top of frontplate) Flange Frontplate Backplate Figure 7 Figure 8 Page - 10 - Simulated Display M6 x 12mm Security Screws Figure 9 Installation Manual