Sony FWD42B2/DS User Manual (The FWD32B1,FWD42B2,FWD46B2 and FWD55B2 Operation - Page 62
Remote Control, Button Description
View all Sony FWD42B2/DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Remote Control Note You cannot use the S VIDEO button, button, the OPTION1 button and the OPTION2 button on this display. Button Description 1 ON (power-on) button Press to turn the display on. Operate when the main power switch on the rear of the display is "ON." 2 DVI button Press to select the signal input to the DVI port. 3 HDMI button Press to select the signal input to the HDMI IN connector from a piece of video equipment. 4 VIDEO button Press to switch between the input signals from VIDEO IN and COMPONENT IN 5 PICTURE button Selects "Picture Mode". Each press toggles between "Vivid", "Standard", "Custom", and "Conference". 6 F/f/G/g/ buttons Press the F/f/G/g buttons to move the selected menu item and set the values. Pressing sets the selected menu or setting items. 7 button Press to change the aspect ratio (page 18). 8 MENU button Press to show the menu on the screen. Press again to hide the menu (page 22). Notes • The 5 button and button have a tactile dot. Use the tactile dot as a reference when operating the display. • Insert two size AA (R6) batteries (supplied) by matching the 3 and # on the batteries to the diagram inside the remote control's battery compartment. Caution Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. When you dispose of the battery, you must obey the law in the relative area or country. Push and slide to open , 16 GB