Sony FWD42B2/DS User Manual (The FWD32B1,FWD42B2,FWD46B2 and FWD55B2 Operation - Page 72
Screen Settings
View all Sony FWD42B2/DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Screen Settings For the setting method, see "Overview of the Menus" (page 22). Note If no signal is being input, "Aspect" and "Adjust Screen" cannot be set. Menu Function and operation Multi Display Multi Display Off 2×2 3×3 4×4 1×2 1×3 1×4 2×1 3×1 4×1 Position Output Format Tiles Allows you to make settings for connecting multiple displays to form a video wall. Notes • During video input, "Multi Display" displays a picture as close as possible to the current "Aspect" setting. But during PC input, it displays with "Aspect" set to "Full 2". • When "Position" is set to the right-bottom, the 1 indicator lights up even if "LED" is set to "Off". The indicator also lights up even when the display is off (standby), errors are detected, or the display is in sleep mode including the case of no signal or unsupported signal. • "Multi Display" function cannot be used for 480i, 576i,1080/50i, 1080/60i or 1080/ 24psf signal. Do settings to form a video wall. Uses a single screen. Settings to connect 2, 3 or 4 displays both vertically and horizontally. Settings to connect 2, 3 or 4 displays horizontally. Settings to connect 2, 3 or 4 displays vertically. Settings for the screen position of each display. You can select a picture output format. The picture position is automatically adjusted, and you can get a suitable picture output. Shows full signal on each screen. Window Shows one large picture with multi display naturally. Part of the signal will go behind the bezel area. LED 26 GB Select "On" or "Off". If you select "On", the 1 indicator on the front panel (page 10) to be continually turned on.