Sony FWD42B2/DS User Manual (The FWD32B1,FWD42B2,FWD46B2 and FWD55B2 Operation - Page 75
Advanced Setup, Function and operation, Control Mode, Display+Remote, Display Only, Remote Only
View all Sony FWD42B2/DS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Advanced Setup Menu Control Mode Display+Remote Display Only Remote Only Auto Screen Adjust Auto Shut Off DPMS Overscan Auto On Off Function and operation Set to control the display from the remote control or from the display. Note When this item is operated, the available modes will differ depending on whether you select by the remote control or the display. When setting this item with button on the remote control, you can select only "Display+Remote" or "Remote Only". When setting this item with button on the display, you can select only "Display+Remote" or "Display Only". Enables operation of the display with the control buttons on the display and the remote control. Enables operation of the display with the control buttons on the display. You can only use buttons on the display to enter this setting. Enables operation of the display with the remote control. You can only use the remote control to enter this setting. Select "On" or "Off". If you select "On", it saves settings such as picture size and position for each input signal, and the last settings are automatically applied. Note The "Auto Screen Adjust" function only works during RGB input. Select "On" or "Off". When "On" is selected, the display automatically goes into standby mode or power saving mode if no signal is input from the DVI, the HDMI, the HD15 (RGB/COMPONENT) or the COMPONENT input connectors for about 30 seconds. If no signal is input from the VIDEO connector for about 5 minutes, the display automatically goes into standby mode. Tips • This function is available when "Screen Saver" is set to "Off". • If "DPMS" is set to "On", you can select the settings for activating the power saving mode. Select "On" or "Off". When "On" is selected, the display automatically goes into power saving mode if no signal is input from the DVI, the HDMI or the HD15 (RGB) input connectors for about 30 seconds. When "Off" is selected, the display automatically goes into standby mode if no signal is input from the DVI, the HDMI or the HD15 (RGB) input connectors for about 30 seconds. Tips • While in the standby mode, press the 1 button on the display or the ON button on the remote control to turn the display on. In the power saving mode, the display is turned on automatically when a signal is input. • This function is available when "Screen Saver" is set to "Off". • This function is available when "Auto Shut Off" is set to "On". Selects whether to display images with overscan or justscan. Automatically determines whether it is a DTV signal, then overscans and displays the image. Displays image with overscan. Displays image with justscan. Note During DTV signal input, it may display a screen like when a PC signal is input. Example: 480P → 720 × 480/60 GB 29 GB