Sony GDM-5510 Installation Guide - Page 3
Safety Instructions, Quick Specifications, Identifying parts and controls
View all Sony GDM-5510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Safety Instructions Observe the following safety guidelines when connecting and using your monitor: • Be sure that your monitor is electrically rated to operate with the AC power available in your location. • Locate your monitor near an easily accessible electrical outlet. • Place the monitor on a solid surface and treat it carefully. The screen can be damaged if dropped, sharply hit, or touched with a sharp or abrasive implement. • Put your monitor in a location with low humidity and a minimum of dust. • Never use your monitor if the power cable has been damaged. Do not allow anything to rest on the power cable, and keep the cable away from where people could trip over it. • Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock. • To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor's case. • Be sure to hold the plug, not the cable, when disconnecting the monitor from an electrical outlet. • Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the monitor on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the cabinet. If you put the monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation. • Do not expose the monitor to rain or use it near water. If the monitor accidentally gets wet, unplug it and contact your service representative immediately. You can clean the exterior of the monitor with a damp cloth when necessary, but be sure to unplug the monitor first. • If your monitor does not operate normally-in particular, if there are any unusual sounds or smells coming from it-unplug the monitor immediately and contact your service representative. Quick Specifications AC input voltage/current Power consumption Operating Temperature Dimensions Mass 100 to 240 V, 50 - 60 Hz, 2.0 - 1.0 A Approx. 135 W 10 °C to 40 °C Approx. 501 × 508 × 505 mm (w/h/ d) (19 3/4 × 20 × 20 inches) Approx. 31.5 kg (69 lb 7 oz) This package contains • Monitor display • USER'S MANUALS (includes Quick Setup Guide and Operating Instructions). Identifying parts and controls INPUT 1 2 MENU OK 12 3 4 1 INPUT (input) switch This switch selects the INPUT 1 (video input 1 (13W3) connector: y1) or INPUT 2 (video input 2 (HD15) connector: y2). EN 2 MENU button This button is used to display or close the menu. 3 Control button (OK, M/m) This button is used to make adjustments to the monitor and call up the CONTRAST menu directly. 4 ! (power) switch and indicator This button turns the monitor on and off. The power indicator lights up in green when the monitor is turned on, and lights up in orange when the monitor is in power saving mode. 1