Sony HCD-HX7 Service Manual - Page 16
select BLUETOOTH HX5.
View all Sony HCD-HX7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
HCD-HX3/HX5/HX7 CD SERVICE MODE This mode can run the CD sled motor freely. Use this mode, for instance, when cleaning the optical pick-up. Procedure: 1. Press the I/1 button to turn the power on. 2. Press the [FUNCTION] button to select "CD" (HX3/HX7). Press the [CD] button on the remote commander to select "CD" (HX5). 3. Press three buttons of [SEARCH], + and Z simultaneously, the message "SERVICE MODE" is displayed on the fluorescent indicator tube. 4. Press the - button to move the optical pick-up to inside track and the message "SLED IN" is displayed on the fluorescent indicator tube, or press the + button to outside track and the message "SLED OUT" is displayed on the fluorescent indicator tube. 5. Press the [DSGX] button, "LD ON" or "LD OFF" is displayed on the fluorescent indicator tube. Each time [DSGX] button is pressed, laser diode on/off is changed over. 6. To release this mode, press the I/1 button. BT TEST MODE (HX5/HX7) This mode is used to check the firmware version and address of bluetooth module. Procedure: 1. Press the I/1 button to turn the power on. 2. Press the [FUNCTION] button to select "BLUETOOTH" (HX7). Press the [FUNCTION] button on the remote commander to select "BLUETOOTH" (HX5). 3. Press three buttons of [SEARCH], - and [BLUTOOTH OPR] simultaneously, the message "BT Test" is displayed on the fluorescent indicator tube. Then, the display is automatically changed to the firmware version of bluetooth module. 4. Press the [DISPLAY] button, address of bluetooth module is displayed on the fluorescent indicator tube. 5. To release this mode, press the I/1 button. 16