Sony HMZ-T3W Reference Guide - Page 23

Attaching and Replacing Earbuds Bass may be inaudible unless earbuds fit well. For a better listening experience, try a different earbud size or adjust the position of the earbuds, so that they fit perfectly in your ears. Medium-sized earbuds are initially attached to the headphones, at the time of purchase. If the earbuds feel uncomfortable, try replacing them with the supplied large or small earbuds. Earbud sizes are color-coded and can be identified by the color inside. To avoid having the earbuds come off in your ear, be sure to attach earbuds securely to the headphones when replacing them. Earbud sizes (inside color) Colored parts Small SS (Red)  Large S M L (Orange) (Green) (Light blue) To detach an earbud While holding the headphone securely, twist the earbud as you pull it off. To attach an earbud Push the parts inside of the earbud into the headphone until the projecting part of the headphone is fully covered. About noise isolation earbuds Supplied noise isolation earbuds provide a snug fit for effective attenuation of ambient noise. Pressure-relieving urethane cushion S (Orange) M (Green) L (Light blue) Notes • Prolonged use of snugly fitting earbuds may strain your ears. If you experience discomfort, discontinue use. • The pressure-relieving urethane cushion is extremely soft. If it breaks or detaches from the earbuds, it will not take its correct position and the earbuds will lose their noise isolation function. • The urethane cushion may deteriorate over time. If the pressure-relieving power is lost and the urethane cushion hardens, the earbuds may lose their noise isolation function. • Do not wash the earbuds. Keep them dry, otherwise they may deteriorate quickly. Tip • If the earbud slips in your fingers and remains attached, try holding it with a dry cloth for a better grip. Replacing Consumables The following replacement parts are available. • Earbuds* • Light blocker (Top) (1 each for the left and right) • Light blocker (Bottom) 23