Sony HT-CT260H Operating Instructions - Page 31
OTHERS, RESET, Additional Information, Press, to turn on the Sound, while pressing INPUT, and VOL - connect to tv
View all Sony HT-CT260H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
OTHERS The remote control does not function. Point the remote control at the remote control sensor on the system. Remove any obstacles in the path between the remote control and the system. Replace the battery in the remote control with new one, if it is weak. Make sure you select the correct input on the remote control. The Control for HDMI function does not work properly. Check the HDMI connection (page 14). Set up the Control for HDMI function on the TV. Check the Control for HDMI settings on the connected equipment. Refer to the operating instructions supplied with the connected equipment. If you connect/disconnect the AC power cord (mains lead), wait for more than 15 seconds and operate the system. "PROTECT" appears on the front panel display. Press to turn off the system. After "STBY" disappears, disconnect the AC power cord (mains lead), then check that nothing is blocking the ventilation holes of the system. RESET If the system still does not operate properly, reset the system as follows: 1 Press to turn on the Sound Bar. 2 Press while pressing INPUT and VOL on the Sound Bar. "RESET" appears and the system is reset. AMP menu, sound field, etc., return to the default settings. Additional Information 31US