Sony ICD-PX820 Operating Instructions - Page 43

automatically at the beginning of that message when the playback ends. To listen to the same message again Press N PLAY/STOP•ENTER, and the same message will be played back from the beginning. To stop the alarm playback Press any button other than VOL +/- while the alarm sound is heard. If the HOLD function is activated, you can stop the alarm playback by pressing any button. P Notes • You can set only one alarm each one message. • "ALARM OFF (or ON)" will not appear and the alarm cannot be set if the clock has not been set or no message has been recorded in the selected folder. • When the clock has not been set or no messages are recorded, you cannot set the alarm. • The alarm sounds even if you set "BEEP" to "OFF" in the menu (page 57). • If you try to set the alarm to play back a message at a previously set time on another message, "PRE SET" will be displayed, preventing new settings. • If the alarm time comes during recording, the alarm will sound after the recording is finished. "," will flash when the alarm time comes. • If the alarm time comes while you are updating data, the alarm will be cancelled automatically. • If more than one alarm time comes, only the first message will be played back with an alarm. • Once the alarm is set, the alarm will not be cancelled, even after the message is played back. • If the alarm time comes while another message is being played back with an alarm, the payback stops and the new message will be played back. • If you divide a message you have set an alarm for, the alarm setting remains on only the first part of the divided message. • If you delete a message on which you have set an alarm, that alarm will be also cancelled. • If the alarm time comes during erasing operation, alarm will sound for 10 seconds after the erasing is finished and playback begins. 43GB Other Playback Operations