Sony ICF-CL75iP Operating Instructions - Page 27

Additional information, Notes on use

Page 27 highlights

Additional information *3) When using a "Memory Stick Micro" media with the clock radio, always insert it into an M2 adaptor. *4) "M2" is an abbreviation for "Memory Stick Micro" media. In this section, "M2" is used to describe "Memory Stick Micro" media. *5) Data reading/recording that requires "MagicGate" copyright protection cannot be performed. "MagicGate" is the general name of a copyright protection technology developed by Sony using authentication and encryption. • The clock radio does not support 8 bit parallel data transfer. Notes on use • For the latest information on the "Memory Stick" media types that the clock radio supports, see the "Memory Stick" media compatibility information on the Sony web site: http://www.memorystick.com/en/support/ compatible.html • Do not insert more than one "Memory Stick" media at the same time, which may cause trouble with the clock radio. • If you use a "Memory Stick Micro" media with the clock radio, "Memory Stick Micro" media needs to be inserted into an "M2" adaptor. • If you insert a "Memory Stick Micro" media into the clock radio without an "M2" adaptor, you may be unable to remove the "Memory Stick Micro" media. • If you insert a "Memory Stick Micro" media into an "M2" adaptor, and insert the "M2" adaptor into a "Memory Stick Duo" media adaptor, the clock radio may not operate properly. • When you format a "Memory Stick" media, use the format function of your clock radio. If you format a "Memory Stick" media with your computer, images may not be displayed properly. • When you format a "Memory Stick" media, all the data including protected image files will be erased. To avoid erasing important data by accident, make sure to check the contents of the "Memory Stick" media before formatting. • You cannot record, edit or delete data if you slide the write-protect switch to LOCK. Write-protect switch Write enable position Write protect position Place the label here. • Do not attach any other material than the supplied label on the labelling position. When you attach the supplied label, be sure to attach it to the labelling position. Be careful that the label does not stick out. 27US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Additional information
27
US
*3)
When using a “Memory Stick Micro” media with
the clock radio, always insert it into an M2 adaptor.
*4)
“M2” is an abbreviation for “Memory Stick Micro”
media. In this section, “M2” is used to describe
“Memory Stick Micro” media.
*5)
Data reading/recording that requires “MagicGate”
copyright protection cannot be performed.
“MagicGate” is the general name of a copyright
protection technology developed by Sony using
authentication and encryption.
• The clock radio does not support 8 bit parallel data
transfer.
Notes on use
• For the latest information on the “Memory
Stick” media types that the clock radio
supports, see the “Memory Stick” media
compatibility information on the Sony web
site:
compatible.html
• Do not insert more than one “Memory Stick”
media at the same time, which may cause
trouble with the clock radio.
If you use a “Memory Stick Micro” media with
the clock radio, “Memory Stick Micro” media
needs to be inserted into an “M2” adaptor.
• If you insert a “Memory Stick Micro” media
into the clock radio without an “M2” adaptor,
you may be unable to remove the “Memory
Stick Micro” media.
• If you insert a “Memory Stick Micro” media
into an “M2” adaptor, and insert the “M2”
adaptor into a “Memory Stick Duo” media
adaptor, the clock radio may not operate
properly.
• When you format a “Memory Stick” media,
use the format function of your clock radio. If
you format a “Memory Stick” media with your
computer, images may not be displayed
properly.
When you format a “Memory Stick” media, all
the data including protected image files will be
erased. To avoid erasing important data by
accident, make sure to check the contents of
the “Memory Stick” media before formatting.
• You cannot record, edit or delete data if you
slide the write-protect switch to LOCK.
• Do not attach any other material than the
supplied label on the labelling position.
When you attach the supplied label, be sure to
attach it to the labelling position. Be careful
that the label does not stick out.
Write-protect switch
Place the label here.
Write
enable
position
Write
protect
position