Sony KDL 46S4100 Operating Instructions - Page 13
Connecting the TV, Cable System or VHF/UHF Antenna System, Cable System or, VHF/UHF Antenna, System - no picture
UPC - 027242738133
View all Sony KDL 46S4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting Started Connecting the TV Getting Started Cable System or VHF/UHF Antenna System You can enjoy high-definition and standard-definition digital programming (if available in your area) along with standard-definition analog programming. This TV is capable of receiving unscrambled digital programming for both cable (QAM and 8VSB) and external VHF/UHF antenna (ATSC). It is strongly recommended that you connect the CABLE/ANTENNA input using a 75-ohm coaxial cable to receive optimum picture quality. A 300-ohm twin lead cable can be easily affected by radio frequency interference, resulting in signal degradation. Cable or VHF/UHF (or VHF only) 75-ohm coaxial cable Rear of TV CABLE/ANTENNA Cable System and VHF/UHF Antenna System Use an optional A-B RF switch (not supplied) to switch between the cable and over-the-air antenna programming, as indicated below. A/B RF Switch Cable A Antenna B Rear of TV CABLE/ANTENNA Be sure to set the Cable setting to On or Off in the Channel settings for the type of input signal you choose (see page 31). 13