Sony KV-36XBR450 Primary User Manual - Page 20
s IN jack. The TV, Using the Channel Menu
View all Sony KV-36XBR450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installing the TV To set up your TV to use both a Cable Box and a direct-connect CATV cable: 1 Connect the Cable TV cable to the TV's VHF/UHF jack. 2 Using a coaxial cable, connect the TV's TO CONVERTER jack to the cable box's IN jack. The TV's internal converter allows you to switch between unscrambled signals coming straight into the TV and scrambled signals coming in through the cable box, eliminating the need for an external splitter. 3 Using a coaxial cable, connect the cable box's OUT jack to the TV's AUX jack. Cable box IN OUT AUX Rear of TV TO CONVERTER 75-ohm coaxial cable (not supplied) CATV cable (unscrambled channels) Signal VHF/UHF To switch between channels from Cable Box and channels coming directly into TV ❑ Press the ANT button on the TV remote control. To use the TV remote control to switch channels on the cable box ❑ Program the remote control as necessary. (See "Programming the Remote Control" on page 50.) To use the cable box ❑ Have your TV tuner set to channel 3 or 4 (as appropriate) and then use the Cable Box to change channels. To prevent the accidental switching of TV channels ❑ When using the VCR or Cable Box, you can use the Channel Fix feature to lock in a channel. The Channel Fix feature is under the Channel menu. (See "Using the Channel Menu" on page 40.) 12