Sony LBT-W900AV Operating Instructions - Page 24

Programming CD tracks (continued) 1 Place CDs and close the front cover. 2 Press FUNCTION repeatedly until "CD" appears in the display. 3 Press PLAY MODE repeatedly until "PROGRAM" appears in the display. 4 Press DISC SKIP (or D.SKIP on the remote) to select a CD. 5 Turn the jog dial until the desired track appears in the display. Disc number Track number Total playing time 6 Press PLAY MODE once. The track is programmed. First "STEP" and the programmed playing order appear, then the total playing time appears. The last programmed track Total playing time To cancel Program Play Press PLAY MODE repeatedly until "PROGRAM," "ALL DISCS SHUFFLE," or "1 DISC SHUFFLE" disappears from the display. To Check the program Clear the last selected track Clear a specific track Add a track to the program Clear the entire program Press CHECK on the remote repeatedly. After the last track, "CHECK END" appears. CLEAR on the remote in stop mode. CHECK on the remote repeatedly until the number of the track to be cleared lights up, then press CLEAR. 1 Press DISC SKIP (or D.SKIP on the remote) to select a CD. 2 Turn the jog dial to select a track. 3 Press PLAY MODE. p once in stop mode or twice while playing. Tips • The program you created remains in the CD player's memory even after it has been played. Press ·P to play the same program again. • If "--.--" appears instead of the total playing time while programming, this means: - you have programmed a track numbered over 20, or - the total playing time has exceeded 100 minutes. 7 Repeat steps 4 through 6 to program additional tracks. Skip step 4 to select tracks from the same disc. 8 Press ·P. All the tracks play in the order you selected. 24