Sony LBTZT4 Operating Instructions - Page 21

Notes • Do not connect the system and the USB device through an USB hub. • When transferring from an AUDIO CD, the tracks are transferred as 128 kbps MP3 files. When transferring from an MP3 disc, MP3 files are transferred with the same bit rate as the original MP3 files. • When transferring from a source other than disc, the files are transferred as 128 kbps MP3 files. • While transferring from an MP3 disc, no sound is output. • CD-TEXT information is not transferred in the created MP3 files. • If you cancel the transferring partway, an MP3 file is created up to the point when the transferring was stopped. • Transferring stops automatically if: - the USB device runs out of space during transferring. - the number of audio files on the USB device reaches the limit for the number that the system can recognize. - the function or tuner band is changed. • Up to 999 audio files or 997 folders can be transferred on a single USB device. The maximum number of audio files and folders may vary depending on the audio file and folder structure. • If a folder or file that you are trying to transfer already exists on the USB device with the same name, a sequential number is added after the name without overwriting the original folder or file. • Do not remove the USB device during transferring or erase operations. Doing so may corrupt the data on the USB device or damage the USB device itself. • You cannot eject the disc, select another disc, track or file, pause playback or find a point in the track or file during CD-USB Synchronized Transfer or REC1 Transferring. Listening to music of an USB device You can listen to music stored in the USB device. The audio formats that can be played back by this system are MP3, AAC and WMA only.* See "Compatible USB devices with this system" (page 44) for a list of USB devices that can be connected to this system. * Files with copyright protection (Digital Rights Management) cannot be played by this system. Files downloaded from an online music store may not be played on this system. 1 Select the USB function. Press USB (RM-AMU006) or press FUNCTION +/- (RM-AMU008) repeatedly (or press USB on the unit). 2 Connect an optional USB device to the (USB) port on the unit. When the USB device is connected, the display changes as follows: "USB READING" t Volume label* * "STORAGE DRIVE" appears when there is no volume label assigned to the USB device. "WALKMAN" appears if the USB device is the supported Sony digital music player. Note It may take some time before "USB READING" appears depending on the type of USB device connected. 3 Start playback. Press N (or NX on the unit). The files are played in alphabetical order. 4 Adjust the volume. Press VOLUME +/- (or turn MASTER VOLUME on the unit). Continued l 21GB Basic Operations