Sony LBTZT4 Operating Instructions - Page 37

Messages, Locked, No Disc, No Step, Not In Use, Off Time Ng, Push Select, Push Stop, Reading

Get Sony LBTZT4 - Mini Hi-Fi Shelf System PDF manuals and user guides
UPC - 027242729902
View all Sony LBTZT4 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Others To change the AM tuning interval (except for European and Russian models) The AM tuning interval is factory-preset to 9 kHz (or 10 kHz, for some areas). You cannot change the AM tuning interval in Power Saving Mode. Use the buttons on the unit for this operation. 1 Select the AM band, and then turn off the system. 2 While holding down ENTER, press "/1. The system turns on automatically and "AM 9K STEP" or "AM 10K STEP" appears. All the AM preset stations are erased. To reset the interval to the factory preset, repeat the procedure. To reset the system to factory settings If the system still does not operate properly, reset the system to factory settings. You cannot reset the system to factory settings in Power Saving Mode. Use the buttons on the unit for this operation. 1 Disconnect and reconnect the power cord, and then turn on the system. 2 Press x, ENTER, and "/1 at the same time. "COLD RESET" appears in the display. All user-configured settings, such as preset radio stations, timer, and the clock, are reset to factory setting. Messages CD/MP3 player, Tuner, Tape LOCKED: The disc tray does not open. Contact your nearest Sony dealer. NO DISC: There is no disc on the disc tray. NO STEP: All of the programmed steps have been erased. NOT IN USE: You pressed an invalid button. OFF TIME NG: The Play Timer or Recording Timer start and stop times are set to the same time. OVER: You have reached the end of the disc while pressing M during playback or pause. PUSH SELECT: You tried to set the clock or timer during timer operation. PUSH STOP: Stop playback, then select the play mode. READING: The system is reading information of the disc. Some buttons are not available. SET CLOCK: You pressed CLOCK/ TIMER SELECT (RM-AMU006) before the clock is set. SET TIMER: You pressed CLOCK/ TIMER SELECT (RM-AMU006) before the Play Timer or Recording Timer is set. STEP FULL: You tried to program more than 25 steps. USB device DATA ERROR: You tried to play a file that is not playable. DEVICE ERROR: The USB device could not be recognized or an unknown device is connected (page 34). Continued l 37GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
37
GB
Others
To change the AM tuning interval
(except for European and Russian
models)
The AM tuning interval is factory-preset
to 9 kHz (or 10 kHz, for some areas). You
cannot change the AM tuning interval in
Power Saving Mode.
Use the buttons on the unit for this
operation.
1
Select the AM band, and then turn
off the system.
2
While holding down E
N
TER, press
"/1
.
The system turns on automatically and
“AM 9K STEP” or “AM 10K STEP”
appears.
All the AM preset stations are erased.
To reset the interval to the factory
preset, repeat the procedure.
To reset the system to factory
settings
If the system still does not operate
properly, reset the system to factory
settings. You cannot reset the system to
factory settings in Power Saving Mode.
Use the buttons on the unit for this
operation.
1
Disconnect and reconnect the
power cord, and then turn on the
system.
2
Press
x
, E
N
TER, and
"/1
at the
same time.
“COLD RESET” appears in the
display.
All user-configured settings, such as
preset radio stations, timer, and the
clock, are reset to factory setting.
Messages
CD/MP3 player, Tuner, Tape
LOCKED:
The disc tray does not open.
Contact your nearest Sony dealer.
NO DISC:
There is no disc on the disc
tray.
NO STEP:
All of the programmed steps
have been erased.
NOT IN USE:
You pressed an invalid
button.
OFF TIME NG:
The Play Timer or
Recording Timer start and stop times
are set to the same time.
OVER:
You have reached the end of the
disc while pressing
M
during
playback or pause.
PUSH SELECT:
You tried to set the
clock or timer during timer operation.
PUSH STOP:
Stop playback, then select
the play mode.
READING:
The system is reading
information of the disc. Some buttons
are not available.
SET CLOCK:
You pressed CLOCK/
TIMER SELECT (RM-AMU006)
before the clock is set.
SET TIMER:
You pressed CLOCK/
TIMER SELECT (RM-AMU006)
before the Play Timer or Recording
Timer is set.
STEP FULL:
You tried to program more
than 25 steps.
USB device
DATA ERROR:
You tried to play a file
that is not playable.
DEVICE ERROR:
The USB device
could not be recognized or an unknown
device is connected (page 34).
Continued
l