Sony LBTZT4 Operating Instructions - Page 32

6 Select the sound source or prepare the USB device. Play Timer Press ./> (RM-AMU006) or v/V (RM-AMU008) repeatedly until the sound source you want appears, and then press ENTER (RM-AMU006) or (RM-AMU008). The display shows the timer settings. Recording Timer Connect a transferable USB device to the (USB) port on the unit. The display shows the timer settings. 7 Press "/1 to turn off the system. To set the Recording Timer using the controls on the unit (REC TIMER) 1 Tune in the preset station (page 28). 2 Press REC TIMER. "ON" appears, and the hour indication flashes. 3 Turn OPERATION DIAL to set the hour, then press ENTER. The minute indication flashes. Use the procedure above to set the minutes. 4 Use the same procedure as in step 3 to set the time to stop recording. The display shows the timer settings. 5 Connect a transferable USB device to the (USB) port on the unit. 6 Press "/1 to turn off the system. To activate or check the timer again RM-AMU006: Press CLOCK/TIMER SELECT, press ./> repeatedly until "PLAY SELECT" or "REC SELECT" appears, and then press ENTER. RM-AMU008: Press TIMER MENU to select "TIMER SELECT", then press . Press v/V repeatedly until "PLAY SELECT" or "REC SELECT" appears, and then press . Unit: Press REC TIMER, turn OPERATION DIAL until "REC SELECT" appears, and then press ENTER. To cancel the timer Repeat the same procedure as above until "TIMER OFF" appears, and then press ENTER (RM-AMU006 or on the unit) or (RM-AMU008). To change the setting Start over from step 1. Tips • The system turns on before the preset time. If the system is turned on at the preset time or if "STANDBY" flashes in the display, the Play Timer and the Recording Timer will not play or record. • The Play Timer setting remains as long as the setting is not canceled manually. • The volume is reduced to minimum during the Recording Timer. • The Recording Timer is canceled automatically after the Recording Timer has been activated. 32GB