Sony LBTZT4 Operating Instructions - Page 25

Basic Operations Adjusting the sound Use the controls on the unit for this operation. To add a sound effect To Press Reinforce the GROOVE repeatedly bass and create until "GROOVE"* or a more powerful "Z-GROOVE"* lights up sound in the display. Select the SURROUND repeatedly surround effect until "SURROUND" lights up in the display. Select a preset sound effect PRESET EQ (or EQ on the remote) repeatedly. To cancel, press PRESET EQ (or EQ on the remote) repeatedly until "FLAT" appears. Enhance the OPTIONS and turn sound quality of OPERATION DIAL to the audio file select "MP3 BOOSTER+", then press ENTER. Turn OPERATION DIAL to select "AUTO", then press ENTER.** * The volume switches to power mode and the equalizer curve changes. **"BOOSTER" lights up in the display when the MP3 BOOSTER+ effect is activated. To turn on the subwoofer (MHC-GT555, MHC-GT444 and LBT-ZT4 only) Press SUBWOOFER repeatedly until the SUBWOOFER indicator on the unit lights up. If you later disconnect the subwoofer, repeat the procedure until the SUBWOOFER indicator on the unit lights off. The volume of the subwoofer is linked to the front speakers. Changing the display Use the controls on the unit for this operation. 1 Press OPTIONS. 2 Turn OPERATION DIAL to select the item you want. ILLUM Change the power illuminator pattern around MASTER VOLUME. M-BACKLIGHT (Meter backlight) Change the Meter Backlight pattern. MTR POINTER (Meter pointer) Change the Meter Pointer pattern. DISPLAY (Front panel display) Change the front panel display pattern. 3 Press ENTER. 4 Turn OPERATION DIAL to select the setting you want, then press ENTER. 5 Repeat steps 2 through 4 to make other settings. To exit the OPTIONS menu Press OPTIONS again. To return to the previous display Press RETURN. 25GB