Sony MHC-GX90D Operating Instructions (primary manual) - Page 62
Listening to audio from a connected component, Listening to a connected MD
View all Sony MHC-GX90D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Hooking up optional components (continued) C MD (VIDEO) IN jacks (VIDEO (MD) IN jacks for North American model) Use audio cords (not supplied) to connect the audio output of the optional component (such as MD deck or VCR) to these jacks. You can then output audio through this system. D MD (VIDEO) OUT jacks (VIDEO (MD) OUT jacks for North American model) Use audio cords (not supplied) to connect the audio input of the optional component (such as MD deck or VCR) to these jacks. You can then make an analog recording from this system. E SUB WOOFER OUT jack (MHC-RV900D and RV600D only) Use speaker cord (not supplied) to connect the sub woofer speaker. F DIGITAL OUT jack Use a digital optical cable (square, not supplied) to connect the audio input of the optional digital component to this jack. You can then record digital audio from this system. G COMPONENT VIDEO OUT jacks Use the component cable (not supplied) to connect the video input of the TV or projector to these jacks. Make sure to match the color of the plugs and the connectors. Listening to audio from a connected component Listening to a connected MD deck 1 Connect the audio cords. See "Hooking up optional components" on page 61. 2 Press MD (VIDEO)*. Start playing the connected component. Listening to a connected VCR 1 Connect the audio cords. See "Hooking up optional components" on page 61. 2 Press MD (VIDEO)*. Hold down MD (VIDEO)* and press ?/1. This switches the "MD" function to "VIDEO". Once you enable the "VIDEO" function, just press MD (VIDEO)*. Notes • If you cannot select "MD" when you press MD (VIDEO)*, press ?/1 while holding down MD (VIDEO)* when the system is on. "VIDEO" will be switched to "MD". To return to "VIDEO", repeat the same procedure. • When you connect a VIDEO CD deck, set to "MD". • This function is factory-set to "MD" for MHCRV900D, RV800D and RV600D, and "VIDEO" for MHC-GX90D. * VIDEO (MD) for MHC-GX90D 62GB