Sony PC120BT Network Function Operating Instructions - Page 18

Registering a Bluetooth device (7) Enter the passkey. For details on how to input characters, see "How to input characters" on page 8. For example, when using the BTA-NW1 Modem Adaptor with Bluetooth Function, the passkey is its serial number which is indicated on the label on the rear panel. ® MODEL NO. BTA-NW1 MODEM ADAPTOR WITH BLUETOOTHTM FUNCTION Passkey The number used when registering a Bluetooth device Tip on "Passkey" The passkey is an identification number needed to allow two Bluetooth devices to communicate with each other. The connection will be permitted after entering the passkey. This "Passkey" is also referred to as a "Bluetooth passkey", "PIN", "Bluetooth PIN", etc. For details, refer to the operating instructions supplied with the Bluetooth adaptor. (8) Select [Enter], then press the centre z on the control button. After the registration is completed, the Bluetooth Setup screen appears again. The selected Bluetooth device is specified. , , Note When the message "Bluetooth Registration Error Check the Passkey" is indicated, select [OK], then press the centre z on the control button. Carry out the procedure again from step 4. (9) Select [Exit], then press the centre z on the control button. The Setup screen appears again. For details on how to turn off the Modem Adaptor with Bluetooth Function, refer to the operating instructions supplied with the Modem Adaptor with Bluetooth Function. (10) Select [Exit], then press the centre z on the control button. The Network Menu appears again. 18-GB