Sony PCV-MXS20 System Reference Manual - Page 51
pin 1 on the module and pin 1 on the socket., Align the module over the appropriate socket
View all Sony PCV-MXS20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Removing, Installing, and Replacing Components 39 9 Align the module over the appropriate socket, noting the location of pin 1 on the module and pin 1 on the socket. Latch Memory module (DDR-DIMM) 111 Pin 1 side 10 Carefully but firmly insert the edge of the module into the socket. 11 Press down firmly and evenly at both corners until the module is fully seated. ✍ When the module is fully seated, the handles on each side are straight up and locked into the slot on each side of the module. If the handles are not totally straight upright, continue to press down on each side of the module until the handles lock into place.
Removing, Installing, and Replacing Components
39
9
Align the module over the appropriate socket, noting the location of
pin 1 on the module and pin 1 on the socket.
10
Carefully but firmly insert the edge of the module into the socket.
11
Press down firmly and evenly at both corners until the module is
fully seated.
✍
When the module is fully seated, the handles on each side are straight up and
locked into the slot on each side of the module. If the handles are not totally
straight upright, continue to press down on each side of the module until the
handles lock into place.
1
1
Pin 1 side
Memory module (DDR-DIMM)
Latch