Sony PCV-RX640 System Reference Manual

Sony PCV-RX640 - Vaio Desktop Computer Manual

Get Sony PCV-RX640 - Vaio Desktop Computer PDF manuals and user guides View all Sony PCV-RX640 manuals
Add to My Manuals
Save this manual to your list of manuals

Sony PCV-RX640 manual content summary:

  • Sony PCV-RX640 | System Reference Manual - Page 1
    i
  • Sony PCV-RX640 | System Reference Manual - Page 2
    may require prior arrangements with participating financial institutions. Sony, VAIO, the VAIO logo, VAIO Digital Studio, VAIO Smart, VisualFlow, Media Bar, MovieShaker, DVgate, PictureGear, and i.LINK are trademarks or registered trademarks of Sony. Memory Stick and Corporation. are trademarks of
  • Sony PCV-RX640 | System Reference Manual - Page 3
    the system configuration you have purchased. See the Specifications sheet for details on your installed optical drives. DVD-RW Laser Diode Properties Laser Output . ! To change the backup battery, please contact your nearest Sony Service Center. ! Caution: The use of optical instruments with this
  • Sony PCV-RX640 | System Reference Manual - Page 4
    iv VAIO Digital Studio System Reference Manual ! Caution: For ADSL, HomePNA and V.90 modem models; to reduce the or for the Sony Service Center nearest you, call 1-888-476-6972 in the United States or 1-800-961-7669 in Canada. Sony Customer Support can be reached at http://www.sony.com/pcsupport.
  • Sony PCV-RX640 | System Reference Manual - Page 5
    SONY Model No.: PCV-7744 Responsible Party: Sony accordance with the instructions, may cause equipment off and on, the user is encouraged to try to correct not expressly approved in this manual could void your authority advance that temporary discontinuance of service may be required. But if
  • Sony PCV-RX640 | System Reference Manual - Page 6
    vi VAIO Digital Studio System Reference Manual The telephone company may remove the equipment from the network until the problem is resolved. Repair of this equipment should be made only by a Sony Service Center or Sony authorized agent. For the Sony Service Center nearest you, call 1-888-4-SONY-PC
  • Sony PCV-RX640 | System Reference Manual - Page 7
    of lithium batteries in household or business trash may be prohibited. For the Sony Service Center nearest you, call 1-888-476-6972 in the United States or by the manufacturer. Discard used batteries according to the manufacturer's instructions. ! The battery pack used in this device may present a
  • Sony PCV-RX640 | System Reference Manual - Page 8
    viii VAIO Digital Studio System Reference Manual Industry Canada Notice NOTICE: The Industry Canada label identifies cause to request that the user disconnect the equipment. Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and
  • Sony PCV-RX640 | System Reference Manual - Page 9
    Lithium Battery vii Industry Canada Notice viii Avis de l'Industrie Canada viii Chapter 1 - Identifying Components 1 Front View 2 Drives ...3 Buttons and Switches 4 Indicators 5 Connectors 6 Rear View ...7 Icons ...8 I/O Connectors 10 Expansion Slots 14 Chapter 2 - Configuring Your System
  • Sony PCV-RX640 | System Reference Manual - Page 10
    an Open I/O Slot 41 Installing a 3.5-inch Internal Hard Disk Drive 42 To identify additional hard disk space 46 Removing the Power Supply 47 Replacing the Power Supply 48 Chapter 4 - System Board 49 Memory Module (DDR-DIMM) Slots 50 Power Supply Header 51 CLR CMOS Jumper 52 Chapter 5 - CMOS
  • Sony PCV-RX640 | System Reference Manual - Page 11
    xi Chapter 7 - Specifications 71 Processor ...71 Chipset ...71 PCI Bus ...71 AGP Bus ...71 Memory Modules 72 Memory Configurations 72 L2 Cache ...72 Graphics ...72 Audio ...73 Communications 73 I/O and Expansion Slots 74 Floppy Disk Drive and Controller 74 Hard Drives and Controller 74
  • Sony PCV-RX640 | System Reference Manual - Page 12
    xii VAIO Digital Studio System Reference Manual
  • Sony PCV-RX640 | System Reference Manual - Page 13
    Chapter 1 Identifying Components The following sections identify and describe each component that is visible from the exterior of the VAIO Digital Studio™ computer. Internal components are identified in another section of this manual. 1
  • Sony PCV-RX640 | System Reference Manual - Page 14
    2 VAIO Digital Studio System Reference Manual Front View
  • Sony PCV-RX640 | System Reference Manual - Page 15
    3 Optical disc drive #1 Optical disc drive #2 Floppy disk drive DRIVE Drive Optical disc drive #1 Optical disc drive #2 Floppy disk drive Description See Specifications sheet for details.* See Specifications sheet for details.* 3.5-inch, 1.44 MB. * The Specifications sheet is supplied with your
  • Sony PCV-RX640 | System Reference Manual - Page 16
    4 VAIO Digital Studio System Reference Manual Buttons and Switches Optical disc eject Floppy disk eject DRIVE Power on/off Button or switch Optical disc eject button Floppy disk eject button Power on/off switch Description Automatically opens and closes the assigned optical drive tray. Ejects a
  • Sony PCV-RX640 | System Reference Manual - Page 17
    5 Floppy disk drive access Hard disk drive access DRIVE Optical disc drive access Power/Stand by Indicator Floppy disk drive access indicator Hard disk drive access indicator Optical drive access indicator Power/Stand by indicator Description On (green) indicates floppy disk drive activity. On
  • Sony PCV-RX640 | System Reference Manual - Page 18
    6 VAIO Digital Studio System Reference Manual Connectors DRIVE i.LINK port USB1, USB2 ports Connector i.LINK® port (IEEE 1394)* USB1, USB2 ports Description Connects to a digital device that has a 4-pin i.LINK connector. Connects to USB devices. * To connect to a 6-pin i.LINK device, use the
  • Sony PCV-RX640 | System Reference Manual - Page 19
    Rear View Identifying Components 7 Mouse Keyboard USB3 USB4 Ethernet VGA Monitor port Printer/Parallel port i.LINK port Serial Headphones Line In Mic KEYBOARD MOUSE USB NETWORK MONITOR PRINTER i.LINK S400 HEADPHONES SERIAL LINE IN MIC 4 3 2 1 LINE TELEPHONE Line Telephone AC Input port
  • Sony PCV-RX640 | System Reference Manual - Page 20
    8 VAIO Digital Studio System Reference Manual Icons Icon KEYBOARD MOUSE USB NETWORK MONITOR PRINTER i.LINK S400 HEADPHONES SERIAL LINE IN MIC 4 3 2 1 LINE TELEPHONE Icon Label Area Icon Label Area Description Mouse
  • Sony PCV-RX640 | System Reference Manual - Page 21
    Identifying Components 9 Icon Description i.LINK® (IEEE 1394) port Headphones jack Line In jack (audio) Mic (microphone) jack Serial port Line jack Telephone jack
  • Sony PCV-RX640 | System Reference Manual - Page 22
    10 VAIO Digital Studio System Reference Manual I/O Connectors The following section identifies the various I/O connectors. Keyboard and Mouse Ports The keyboard and mouse ports are physically identical and have the same pinout.
  • Sony PCV-RX640 | System Reference Manual - Page 23
    Identifying Components 11 Printer/Parallel Port The printer/parallel port is a standard 25-pin DB-25 female port. 13 25 14 1 VGA Monitor Port The monitor port is a standard 15-pin female high-density VGA-type port. 10 15 5 11 1 6
  • Sony PCV-RX640 | System Reference Manual - Page 24
    12 VAIO Digital Studio System Reference Manual Mic, Line In, and Headphones Jacks The microphone, line in, and headphones jacks are physically identical, but have different connections. They are standard 3.5 mm stereo
  • Sony PCV-RX640 | System Reference Manual - Page 25
    . Before connecting compatible i.LINK PC peripherals to your system, such as an optical disk or hard disk drive, confirm their operating system compatibility and required operating conditions. The 4-pin i.LINK port at the bottom of the front panel does not supply power. 6-pin i.LINK port (IEEE
  • Sony PCV-RX640 | System Reference Manual - Page 26
    14 VAIO Digital Studio System Reference Manual Expansion Slots There are three PCI slots, two of which are available for expansion (PCI No. 2 and No. 3). The other PCI slot is occupied by
  • Sony PCV-RX640 | System Reference Manual - Page 27
    Chapter 2 Configuring Your System This chapter contains information on configuring your system. Configuring your system can consist of the following: ❑ Making changes to the BIOS settings. ❑ Making changes to the display's power management settings. 15
  • Sony PCV-RX640 | System Reference Manual - Page 28
    16 VAIO Digital Studio System Reference Manual Accessing the BIOS Setup Utility You must access the BIOS Setup Utility to make changes to the BIOS settings (see "CMOS Setup Options" on page 53 for information on BIOS settings). ! Before rebooting the system, save and close all open files, and exit
  • Sony PCV-RX640 | System Reference Manual - Page 29
    then click Power Options. The Power Options Properties dialog box opens, with the Power Schemes tab displayed. 2 Select the power scheme that is most appropriate for the way you use your computer. To change a power scheme, change the settings for Turn off monitor, Turn off hard disks, System stand
  • Sony PCV-RX640 | System Reference Manual - Page 30
    VAIO Digital Studio System Reference Manual The Turn off monitor option allows you to specify the period of inactivity (in minutes) that you want to elapse before your monitor turns off when your computer is running on AC power your hard disks turn off when your computer is running on AC power. The
  • Sony PCV-RX640 | System Reference Manual - Page 31
    4 Click the Advanced tab. Configuring Your System 19 5 Select the desired settings.
  • Sony PCV-RX640 | System Reference Manual - Page 32
    20 VAIO Digital Studio System Reference Manual 6 Click the Hibernate tab. 7 Select the settings most appropriate for your system.
  • Sony PCV-RX640 | System Reference Manual - Page 33
    21 8 Click the UPS tab. The UPS tab enables you to select and configure an Uninterruptible Power Supply (UPS) device for your system. ✍ A UPS device is an optional accessory not currently supplied with your system. 9 Select and configure the settings most appropriate for your system and click OK
  • Sony PCV-RX640 | System Reference Manual - Page 34
    22 VAIO Digital Studio System Reference Manual
  • Sony PCV-RX640 | System Reference Manual - Page 35
    Components This chapter describes removing, installing, and replacing major components for upgrading, reconfiguring, and troubleshooting the components. ! Before opening the system unit, save and close all open files, exit all open applications, turn off the power to all attached peripheral
  • Sony PCV-RX640 | System Reference Manual - Page 36
    24 VAIO Digital Studio System Reference Manual Removing the Side Cover You must remove the side cover to access the system board, add-in cards, power supply, battery, memory, and internal drives. 1 From the rear of the unit, pull the metal tab shown in the next diagram. 2 Pull the top of the side
  • Sony PCV-RX640 | System Reference Manual - Page 37
    Removing, Installing, and Replacing Components 25 Replacing the Side Cover 1 From the rear of the unit, align the bottom of the side cover so that it
  • Sony PCV-RX640 | System Reference Manual - Page 38
    26 VAIO Digital Studio System Reference Manual Removing a PCI Add-in Card ! Before opening the system unit, save and close all open files, exit all open applications, turn off the power to all attached peripheral devices, shut down the computer, and unplug the power cord. 1 Remove the side cover (
  • Sony PCV-RX640 | System Reference Manual - Page 39
    Replacing Components 27 4 Remove the add-in card from the PCI slot and store the card in an anti-static wrapper for future use. ✍ Grasp the card with one
  • Sony PCV-RX640 | System Reference Manual - Page 40
    28 VAIO Digital Studio System Reference Manual Installing a PCI Add-In Card ! Before opening the system unit, save and close all open files, exit all open applications, turn off the power to all attached peripheral devices, shut down the computer, and unplug the power cord. 1 Remove the side cover (
  • Sony PCV-RX640 | System Reference Manual - Page 41
    Removing, Installing, and Replacing Components 29 5 Replace the screw that secures the card. 6 Attach any necessary cables to the card (see the instructions that came with the add-in card). 7 Replace the side cover (see "Replacing the Side Cover" on page 25). 8 Turn on the computer and follow
  • Sony PCV-RX640 | System Reference Manual - Page 42
    VAIO Digital Studio System Reference Manual an AGP card disables the internal graphics. Your system supports AGP 4X enabled graphics cards. ! Before opening the power cord. 1 Remove the side cover (see "Removing the Side Cover" on page 24). 2 Remove the slot cover from the AGP slot (see "Removing
  • Sony PCV-RX640 | System Reference Manual - Page 43
    Replacing Components 31 5 Lift up the end latch if the latch does not automatically lock back into place. 6 Secure the AGP card with the screw removed in step 2. 7 Replace the side cover (see "Replacing the Side Cover" on page 25). 8 Attach the monitor cable to the monitor port on the AGP
  • Sony PCV-RX640 | System Reference Manual - Page 44
    32 VAIO Digital Studio System Reference Manual Replacing the Lithium Battery You may need to years, after which the battery may be too weak to power the CMOS memory. ! When you remove the lithium battery, all values stored in the CMOS memory (BIOS setup values and Plug and Play values) may be lost.
  • Sony PCV-RX640 | System Reference Manual - Page 45
    remove battery and dispose of it according to the instructions that came with the new battery. 11 press down until the battery is secure. ✍ The Sony CR2032 battery is recommended. Using a type of battery 12 Replace any add-in cards that were removed. 13 Reconnect any cables that were disconnected.
  • Sony PCV-RX640 | System Reference Manual - Page 46
    34 VAIO Digital Studio System Reference Manual 16 If the error message "Error: Check date and time settings." appears during the reboot sequence, press F2 during the reboot process to access the BIOS Setup Utility. If no error message displays, the computer's BIOS settings were retained during the
  • Sony PCV-RX640 | System Reference Manual - Page 47
    computer, and unplug the power cord. 1 Remove the side cover (see "Removing the Side Cover" on page 24). ✍ The memory modules are located beneath the power supply. You need to remove the power supply to reach the memory modules. 2 Remove the power supply (see "Removing the Power Supply" on page 47
  • Sony PCV-RX640 | System Reference Manual - Page 48
    36 VAIO Digital Studio System Reference Manual 4 Reach around each side of the power supply and push down the handle on each side of the memory module to eject the module from its slot. Push out Handles 5 Grasp one edge of the memory module and lift out. Store the module in a static-free bag.
  • Sony PCV-RX640 | System Reference Manual - Page 49
    only 133 Mhz unbuffered FSB-supported memory. PC133 (CL3) does not support EDO or buffered SDRAM memory. 2 Remove the side cover (see "Removing the Side Cover" on page 24). 3 Remove the power supply (see "Removing the Power Supply" on page 47). 4 If necessary, remove the memory module you wish to
  • Sony PCV-RX640 | System Reference Manual - Page 50
    38 VAIO Digital Studio System Reference Manual 7 Align the module over the appropriate slot, noting the location of pin 1 on the module and pin 1 on the slot. Press down here Handles Pin 1 side DDR-DIMM 2 DDR-DIMM 1 Memory module (DDR-DIMM) 1 Indicates pin 1 8 Carefully but firmly insert the edge of
  • Sony PCV-RX640 | System Reference Manual - Page 51
    Removing, Installing, and Replacing Components 39 9 Press power supply (see "Replacing the Power Supply" on page 48). 11 Replace the side cover (see "Replacing the Side Cover" on page 25). 12 Reconnect the power cord and turn on the computer. Your computer automatically recognizes the extra memory
  • Sony PCV-RX640 | System Reference Manual - Page 52
    40 VAIO Digital Studio System Reference Manual Removing a Slot Cover You remove a slot cover when you install an add-in card that occupies a previously-empty slot. ! Before opening the system unit, save and close all open files, exit all open applications, turn off the power to all attached
  • Sony PCV-RX640 | System Reference Manual - Page 53
    unit, save and close all open files, exit all open applications, turn off the power to all attached peripheral devices, shut down the computer, and unplug the power cord. 1 Slide the tip of the slot cover (removed earlier) between the chassis and system board. 2 Push the slot cover down until it
  • Sony PCV-RX640 | System Reference Manual - Page 54
    42 VAIO Digital Studio System Reference Manual Installing a 3.5-inch Internal Hard Disk Drive Your system comes with an available bay to hold an additional 3.5-inch hard disk drive. The drive you install must not require front panel access. The hard disk drive access light blinks when either
  • Sony PCV-RX640 | System Reference Manual - Page 55
    Removing, Installing, and Replacing Components 43 3 Disconnect the drive connector (A in diagram). A B Drive connector Power supply connector Tab C Disk drive holder 4 Disconnect the power connector (B in diagram). 5 Pull out on the tab (C) that secures the drive holder to the chassis.
  • Sony PCV-RX640 | System Reference Manual - Page 56
    VAIO Digital Studio System Reference Manual 6 Slide the drive holder up and out. 7 Slide the new drive into the bottom part of the drive holder and align the holes on each side of the drive holder. 8 Secure the drive to the drive holder using screws in each of the two holes on each side of the drive
  • Sony PCV-RX640 | System Reference Manual - Page 57
    Removing, Installing, and Replacing Components 45 9 Slide the drive holder back into the chassis so that the edge of the holder is flush with the chassis. 10 Push in on the tab (A) to securely latch the holder to the chassis. Drive connectors C E B D Power connectors A Tab Disk drive holder
  • Sony PCV-RX640 | System Reference Manual - Page 58
    46 VAIO Digital Studio System Reference Manual To identify additional hard disk space When you initialize the new hard disk drive, it must be configured as an extended partition in Windows NT file system (NTFS) format. 1 Log on in Windows® as Administrator. 2 Click Start in the
  • Sony PCV-RX640 | System Reference Manual - Page 59
    and Replacing Components 47 Removing the Power Supply You remove the power supply when you insert a memory module (see "Installing System Memory" on page 37). ! Before opening the system unit, save and close all open files, exit all open applications, turn off the power to all attached peripheral
  • Sony PCV-RX640 | System Reference Manual - Page 60
    48 VAIO Digital Studio System Reference Manual Replacing the Power Supply 1 Rotate the power supply down and slide it into the chassis along the rails to each side of the chassis until the tab snaps into position. 2 Replace the screw that secures the power supply to the rear of the chassis.
  • Sony PCV-RX640 | System Reference Manual - Page 61
    Memory CPU Fan CPU Therm Keyboard, Mouse USB3, USB4, Ethernet Printer (top) Monitor, i.LINK i.LINK Header (to front panel) Serial (top) Mic in, Line in, Line out Aux-In (not used) CD-In WOL_CON (not used) Slot No. 4 (AGP) Slot No. 3 (PCI) Slot No. 2 (PCI) Slot No. 1 (PCI) Battery Power Supply
  • Sony PCV-RX640 | System Reference Manual - Page 62
    -DIMM1 DDR-DIMM2 50 VAIO Digital Studio System Reference Manual Memory Module (DDR-DIMM) Slots Both sides of each Double-data rate, Dual Inline Memory Module (DDR-DIMM) look very similar. The side with pin 1 has a small "1" to the left of pin 1. Be sure to orient the memory module correctly in the
  • Sony PCV-RX640 | System Reference Manual - Page 63
    System Board 51 Power Supply Header The power supply header on the system board connects to the power supply connector labelled P1. 10 20 1 11
  • Sony PCV-RX640 | System Reference Manual - Page 64
    52 VAIO Digital Studio System Reference Manual CLR CMOS Jumper There is one user-configurable jumper for CMOS Clear. The computer ships with CMOS Clear in the Normal position. Do not change the position of this jumper unless directed by a technical support person. CMOS Clear 12 3 CMOS Clear Jumper
  • Sony PCV-RX640 | System Reference Manual - Page 65
    BIOS Setup Utility (see "Accessing the BIOS Setup Utility" on page 16). The Award BIOS setup has five menu items on the menu bar. These are: ❑ Main ❑ Advanced ❑ Power are shown without brackets directly below the default option in this guide. The available options are listed in the order they occur
  • Sony PCV-RX640 | System Reference Manual - Page 66
    54 VAIO Digital Studio System Reference Manual Press F10 to save the changes and exit, or press Esc to discard the changes. Follow the on-screen prompts for other choices. The bottom of the screen presents a summary of the keys to use for navigation and control.
  • Sony PCV-RX640 | System Reference Manual - Page 67
    IDE Sub-Menus" on page 56) Secondary Slave (see "IDE Sub-Menus" on page 56) Supervisor Password [Disabled] User Password [Disabled] Installed Memory See Specifications sheet for details.* BIOS Revision 1002 * The Specifications sheet is supplied with your computer's original documentation.
  • Sony PCV-RX640 | System Reference Manual - Page 68
    56 VAIO Digital Studio System Reference Manual IDE Sub-Menus Type Translation Method* Cylinders† Heads† Sectors‡ CHS Capacity* Maximum LBA Capacity* Multi-Sector Transfers* SMART Monitoring* PIO Mode** ULTRA DMA Mode† Set Device As†† [Auto] User Type HDD CD-ROM LS-120 ZIP-100 MO Other ATAPI Device
  • Sony PCV-RX640 | System Reference Manual - Page 69
    CMOS Setup Options 57 Advanced Screen CPU Speed See Specifications sheet for details.* I/O Device Configuration Onboard AC97 Audio Controller [ 7 9 10 11 12 14 15 Onboard LAN Boot ROM [Disabled] Enabled * The Specifications sheet is supplied with your computer's original documentation.
  • Sony PCV-RX640 | System Reference Manual - Page 70
    58 VAIO Digital Studio System Reference Manual Power Screen Power Up Control AC Power Loss Restart Power Up On Modem Act Wake On LAN Hardware Monitor MB Temperature CPU Temperature CPU Fan Speed Power Fan Speed VCORE Voltage +3.3V Voltage +5V Voltage +12V Voltage -12V Voltage [Disabled] Enabled [
  • Sony PCV-RX640 | System Reference Manual - Page 71
    Boot Screen 1. ATAPI CD-ROM 2. Removable Device 3. IDE Hard Drive 4. Other Boot Device Silent Boot CMOS Setup Options 59 [(displays installed drive)] Disabled [Legacy Floppy] LS120 ZIP-100 ATAPI MO Disabled [(displays installed drive)] Disabled [Disabled] Network SCSI Boot Device [Enabled]
  • Sony PCV-RX640 | System Reference Manual - Page 72
    60 VAIO Digital Studio System Reference Manual Exit Screen Exit Saving Changes Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes
  • Sony PCV-RX640 | System Reference Manual - Page 73
    Chapter 6 Miscellaneous Technical Information This chapter contains information on the following subjects: ❑ User and Supervisor password ❑ Beep code error messages ❑ PCI configuration status and error messages ❑ DMA channel assignments ❑ System I/O address map ❑ Memory map ❑ IRQ settings 61
  • Sony PCV-RX640 | System Reference Manual - Page 74
    62 VAIO Digital Studio System Reference Manual User and Supervisor Passwords The system allows you to specify up to two passwords (a User password and a Supervisor password) in the CMOS Setup Utility. The User password is required; the Supervisor password is optional. Access to the CMOS Setup
  • Sony PCV-RX640 | System Reference Manual - Page 75
    , a single short beep signifies that the system is OK. Other beep patterns signify errors. The number of beeps indicates the specific error that occurred. The Sony Online Support technical representative needs to know how many beeps your system produces if there is an error, so be sure to count the
  • Sony PCV-RX640 | System Reference Manual - Page 76
    VAIO Digital Studio System Reference Manual PCI Configuration Status and Error Messages The following is a list of status and error messages that may appear on your system from time to time. Message Floppy Disk boot device (hard disk drive, floppy disk drive, CD-ROM drive, or network drive) could
  • Sony PCV-RX640 | System Reference Manual - Page 77
    the factory default values. The Windows® operating system reassigns resources to best meet the needs of a particular configuration. DMA Channel Channel 4 Channel 2 Default Assignment Direct memory access controller Standard floppy disk controller
  • Sony PCV-RX640 | System Reference Manual - Page 78
    66 VAIO Digital Studio System Reference Manual System I/O Address Map Address Range (hex) 0x00000000-0x00000CF7 0x00000000-0x00000CF7 0x00000010-0x0000001F 0x00000020-0x00000021 0x00000022-0x0000002D 0x00000030-0x0000003F 0x00000040-0x00000043 0x00000044-0x0000005F 0x00000060-0x00000060 0x00000061
  • Sony PCV-RX640 | System Reference Manual - Page 79
    Primary IDE Channel Standard floppy disk controller Communications Port (COM1) Motherboard resources ISAPNP Read Data Port Lucent Win Modem SoundMAX® Integrated Digital Audio SoundMAX Integrated Digital Audio Motherboard resources Motherboard resources Motherboard resources ✍ I/O addresses that may
  • Sony PCV-RX640 | System Reference Manual - Page 80
    68 VAIO Digital Studio System Reference Manual Memory Map Address range 0x0000-0x9FFFF 0xF0000-0xFFFFF 0x100000-0x1FEFFFFF 0xFEC00000-0xFEC000FF 0xFEE00000-0xFEE00FFF IEEE 1394 Host Controller Texas Instruments OHCI Compliant IEEE 1394 Host Controller Motherboard resources Motherboard resources
  • Sony PCV-RX640 | System Reference Manual - Page 81
    Natural PS/2® Keyboard 4 Communications Port (COM1) 6 Standard floppy disk controller 8 System CMOS/real time clock 12 PS/2® Compatible Primary IDE Channel 15 Secondary IDE Channel 17 SoundMAX® Integrated Digital Audio 18 Texas Instruments OHCI Compliant IEEE 1394 Host Controller 19
  • Sony PCV-RX640 | System Reference Manual - Page 82
    70 VAIO Digital Studio System Reference Manual
  • Sony PCV-RX640 | System Reference Manual - Page 83
    describes the technical specifications for your VAIO Digital Studio™ computer. Processor See Specifications sheet for details.* Specifications sheet for details.)* AGP Bus AGP interface specification, rev. 2.0 compliance (supports 2x/4x) 1 AGP slot (open) * The Specifications sheet is supplied
  • Sony PCV-RX640 | System Reference Manual - Page 84
    72 VAIO Digital Studio System Reference Manual Memory Modules Installed memory Maximum memory Voltage Pins Memory type See Specifications sheet for details.** 512 MB (256 MB in each socket) 3.3 V memory only 168-pins with gold-plated contacts 3.3 V PC-133 MHz unrestricted CS latency 2, unbuffered
  • Sony PCV-RX640 | System Reference Manual - Page 85
    Specifications 73 Audio Sound chip Wave synthesis Audio sampling rate Rear panel connectors SoundMAX Integrated Digital Audio AD1881A Software modem is capable of downloading at 56 Kbps. Your phone service, online service, or Internet Service Provider may not support this technology or operate
  • Sony PCV-RX640 | System Reference Manual - Page 86
    MB Hard Drives and Controller Drive EIDE controller IDE hard drive* Description Supports up to four EIDE drives (supports PIO Mode 4 EIDE drives and Ultra DMA/100 Mode drives) See Specifications sheet for details.** * Bus-mastering EIDE driver installed. ** The Specifications sheet is supplied
  • Sony PCV-RX640 | System Reference Manual - Page 87
    Optical disc drive #2 Description See Specifications sheet for details.** See Specifications sheet for details.** System BIOS Make and model ROM Passwords Power management Advanced features Plug and Play devices Special features Award-based 2 Mb flash-ROM* User and supervisor passwords supported
  • Sony PCV-RX640 | System Reference Manual - Page 88
    76 VAIO Digital Studio System Reference Manual
  • Sony PCV-RX640 | System Reference Manual - Page 89
    , specifications 73 computer lithium battery vii configuration jumper, CMOS Clear 52 configuring BIOS setup utility 16 power management 17 connectors i.LINK 6 USB 6 cover for slot 40 removing 24 replacing 25 covering I/O slot 41 CPU - See processor D DIMM - See memory module display, power
  • Sony PCV-RX640 | System Reference Manual - Page 90
    mouse connector 10 O optical disc drive location of 3 performance of discs 3, 75 P passwords, user and supervisor 62 power management, configuring 17 printer connector 11 R RAM - See system memory rear view 7 I/O connectors 10 icons 8 removing add-in card 26 cover 24 memory module 35 slot cover 40
  • Sony PCV-RX640 | System Reference Manual - Page 91
    Index 79 specifications AGP bus 71 audio 73 BIOS 75 chipset 71 communications 73 DIMM configurations 72 floppy disk drive and controller 74 graphics 72 hard drives and controllers 74 I/O and expansion slots 74 L2 cache 72 memory module 72 optical drives 75 PCI bus 71 processor 71 system BIOS 75
  • Sony PCV-RX640 | System Reference Manual - Page 92
    80 VAIO Digital Studio System Reference Manual
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
i