Sony PMWF3K Supplement - Page 18

When playing a clip recorded with NTSC system when "Country" of the OTHERS menu's "System" is "PAL Area" Some frame may be deleted when the frame rate is converted. Video format of playback clip HD-Y HQ 1920/59.94i 1920×1080/49.95i HQ 1920/29.97P 1920×1080/24.97PsF HQ 1920/23.98P HQ 1440/59.94i 1920×1080/49.95i HQ 1440/29.97P 1920×1080/24.97PsF HQ 1440/23.98P SP 1440/59.94i 1920×1080/49.95i SP 1440/23.98P 1920×1080/24.97PsF HQ 1280/59.94P 1280×720/49.95P HQ 1280/29.97P HQ 1280/23.98P DVCAM59.94i SQ/EC Playback impossible DVCAM29.97P SQ/EC VIDEO OUT output format Analog composite 720×576/50i 720×576/25PsF 720×576/50i 720×576/25PsF 720×576/50i 720×576/25PsF 720×576/50i 720×576/25PsF Playback impossible Output formats of the i.LINK (HDV/DV) connector The format of serial digital signals fed from the i.LINK (HDV/DV) connector depends on the related Setup menu settings or the format of the clip to be played, as shown below. In E-E Display/Recording mode No signal is fed out from the i.LINK (HDV/DV) connector when "SDI/HDMI/i.LINK I/O Select" of the VIDEO SET menu is set to "HD SDI," "SD SDI," "HD HDMI," "SD HDMIi," or "SD HDMI P." "Country" setting of the OTHERS menu's "System": NTSC Area/NTSC(J) Area i.LINK output format OTHERS menu "System": VIDEO SET menu "SDI/HDMI/i.LINK I/O Select" setting "Format" setting HD HDMI & HDV, SD HDMI i & HDV SD HDMI i & DVCAM HD HDMI P & HDV HQ 1920/59.94i No signal 720×480/59.94i HQ 1920/29.97P 720×480/29.97PsF HQ 1920/23.98P No signal HQ 1440/59.94i 720×480/59.94i HQ 1440/29.97P 720×480/29.97PsF HQ 1440/23.98P No signal SP 1440/59.94i 1440×1080/59.94i 720×480/59.94i SP 1440/23.98P 1440×1080/59.94i 1) 720×480/59.94i 1) HQ 1280/59.94P No signal 720×480/59.94i 2) HQ 1280/29.97P 720×480/29.97PsF HQ 1280/23.98P No signal DVCAM59.94i SQ/EC 720×480/59.94i DVCAM29.97P SQ/EC 720×480/29.97PsF 1)59.94i provided through 2-3 pulldown of 23.98P 2)59.94i provided through conversion from 59.94P 18 Formats and Limitations of Outputs