Sony RDH-GTK37iP Operating Instructions - Page 12

Inserting batteries Insert the two supplied R6 (size AA) batteries, matching the polarities shown below. - Horizontal installation Notes • Do not mix an old battery with a new one or mix different types of batteries. • If you do not use the remote control for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion. Installing the system The system can be installed either vertically or horizontally. Select the installation style based on your preferences. Notes • Install the system horizontally when connecting iPod nano model to the Terminal for Apple Device. • Be sure to select the vertical sound effect when the system is installed vertically (page 22). - Vertical installation Using the iPod/iPhone When connecting to the Terminal for Apple Device You can connect the models as follows to the Terminal for Apple Device. • iPod touch 5th generation • iPod nano 7th generation • iPhone 5 To prevent the iPod/iPhone from falling, always secure the iPod/iPhone with the holding arm when connecting to the Terminal for Apple Device. When removing the iPod/iPhone, lift up the holding arm until it clicks and snaps into position, and then disconnect the iPod/ iPhone from the Terminal for Apple Device. 1 Place the iPod/iPhone onto the Terminal for Apple Device. 2 Press the PUSH button until the holding arm is released. The holding arm flips out to secure the iPod/iPhone. 12GB