Sony RDH-GTK37iP Operating Instructions - Page 29

Messages, Precautions, Charging, Child Lock, Connect, Error, Nodevice, No Track, Not Support, Pairing - reset

Page 29 highlights

• Turn down the volume of the connected Bluetooth device. Tuner Severe hum or noise, or stations cannot be received. ("TUNED" or "ST" flashes in the display panel.) • Connect the antenna properly. • Change antenna location and its orientation to obtain good reception. • Connect a commercially available external antenna. • Consult your nearest Sony dealer if the supplied AM antenna has come off from the plastic stand. • Turn off surrounding electrical equipment. To reset the system If the system still does not operate properly, reset the system to factory default settings. Use the buttons on the unit to perform this operation. 1 Unplug and plug the power cord back in. 2 Press "/1 to turn on the system. 3 While holding down FUNCTION, press "/1 for about 3 seconds. "RESET" appears in the display panel. All user-configured settings, such as preset radio stations, timer, and the clock are reset to factory default setting. Messages CHARGING: The iPod/iPhone is being charged when the system is off (standby mode). CHILD LOCK: The child lock function has been enabled. CONNECT: The iPod/iPhone is connected during iPod function or the system is connecting to the last connected device during Bluetooth function. ERROR: The USB device could not be recognized or an unknown device is connected. NoDEVICE: No USB device is connected. NO TRACK: No playable file is loaded in the system. NOT SUPPORT: An unsupported USB device is connected, the USB device is connected through a USB hub, or the iPod/iPhone whose battery is empty is connected. PAIRING: The system is in pairing mode. PUSH STOP: You tried to perform an operation that can be performed only when the playback is stopped. READING: The system is reading information of the USB device. Some buttons are not available. TIME NG: The start and stop times for Play Timer are the same. Precautions On safety • Completely disconnect the power cord (mains lead) from the wall outlet (mains) if it is not going to be used for an extended period of time. When unplugging the unit, always grip the plug. Never pull the cord itself. • Should any solid object or liquid get into the system, unplug the system, and have it checked by qualified personnel before operating it again. • (For customers in United States only) One blade of the plug is wider than other for the purpose of safety and will fit to the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer. 29GB Additional Information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

29
GB
Additional Information
Turn down the volume of the connected
Bluetooth
device.
Tuner
Severe hum or noise, or stations
cannot be received. (“TUNED” or
“ST” flashes in the display panel.)
Connect the antenna properly.
Change antenna location and its
orientation to obtain good reception.
Connect a commercially available
external antenna.
Consult your nearest Sony dealer if the
supplied AM antenna has come off from
the plastic stand.
Turn off surrounding electrical
equipment.
To reset the system
If the system still does not operate
properly, reset the system to factory
default settings.
Use the buttons on the unit to perform this
operation.
1
Unplug and plug the power cord
back in.
2
Press
"/1
to turn on the system.
3
While holding down FUNCTION,
press
"/1
for about 3 seconds.
“RESET” appears in the display panel.
All user-configured settings, such as
preset radio stations, timer, and the
clock are reset to factory default
setting.
Messages
CHARGING:
The iPod/iPhone is being
charged when the system is off (standby
mode).
CHILD LOCK:
The child lock function
has been enabled.
CONNECT:
The iPod/iPhone is
connected during iPod function or the
system is connecting to the last connected
device during
Bluetooth
function.
ERROR:
The USB device could not be
recognized or an unknown device is
connected.
NoDEVICE:
No USB device is
connected.
NO TRACK:
No playable file is loaded
in the system.
NOT SUPPORT:
An unsupported USB
device is connected, the USB device is
connected through a USB hub, or the
iPod/iPhone whose battery is empty is
connected.
PAIRING:
The system is in pairing
mode.
PUSH STOP:
You tried to perform an
operation that can be performed only
when the playback is stopped.
READING:
The system is reading
information of the USB device. Some
buttons are not available.
TIME NG:
The start and stop times for
Play Timer are the same.
Precautions
On safety
Completely disconnect the power cord (mains
lead) from the wall outlet (mains) if it is not
going to be used for an extended period of
time. When unplugging the unit, always grip
the plug. Never pull the cord itself.
Should any solid object or liquid get into the
system, unplug the system, and have it
checked by qualified personnel before
operating it again.
(For customers in United States only)
One blade of the plug is wider than other for
the purpose of safety and will fit to the wall
outlet only one way. If you are unable to insert
the plug fully into the outlet, contact your
dealer.