Sony RDH-GTK37iP Operating Instructions - Page 21

Tuner/Sound Adjustment To change the AM tuning interval (except for European, Russian and Saudi Arabian models) The default setting for AM tuning interval is 9 kHz (or 10 kHz for some areas). Use the buttons on the unit to perform this operation. 1 Press FUNCTION repeatedly to select AM band. 2 Press "/1 to turn off the system. 3 While holding down TUNING +, press "/1. "9K STEP" or "10K STEP" appears in the display panel. When you change the interval, all the AM preset stations are erased. Presetting radio stations You can store up to 20 FM and 10 AM stations as your favorite stations. 1 Tune to the station you want. 2 Press TUNER MEMORY. Preset number 3 Press +/- repeatedly to select the preset number you want, then press . "COMPLETE" appears in the display panel. The station is stored. To tune to a preset station Press TUNING MODE repeatedly until "PRESET" lights up in the display panel. Then, press +/- repeatedly to select the preset number you want. Sound Adjustment Adjusting the sound To Do this Reinforce the Press BASS BAZUCA. bass and create a more powerful sound Select a preset sound effect Press EQ repeatedly. To cancel preset sound effect, press EQ repeatedly to select "FLAT". Creating a party atmosphere (DJ EFFECT) Use the buttons on the unit to perform this operation. 1 Press FLANGER or ISOLATOR. The selected button lights up and the effect is activated. • FLANGER: Create a deep flanging effect that is similar to the roar of a jet plane. • ISOLATOR: Isolate a specific frequency band by adjusting the other frequency bands. For example, when you want to focus on vocal and etc. 2 Turn DJ CONTROL +/- to adjust the effect level. To turn off the effect Press the selected effect button again. 21GB