Sony RDR-HX730 Operating Instructions - Page 95
Recording/Timer recording, Editing, Recording from the equipment, with a timer
View all Sony RDR-HX730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Recording/Timer recording/ Editing The channel cannot be changed from the channel you are recording. , Set the TV's input source to "TV." Recording does not start immediately after you press z REC. , Operate the recorder only after "LOAD," "FORMAT," or "INFOWRITE" disappears from the front panel display. Nothing was recorded even though you set the timer setting correctly. , There was a power failure during recording. , The recorder's internal clock stopped due to a power failure that lasted for more than 1 hour. Reset the clock (page 81). , The channel was disabled after the timer recording was set. See "Tuner Preset" on page 80. , Disconnect the AC power cord from the AC outlet, and connect it again. , The program contains copy protection signals that restrict copying. , The timer setting overlapped another setting that was set later. , There is no DVD inside the recorder. , There is not enough disc space for the recording. , A separate recording was in the process of being made without the use of the timer (page 50). , The recorder was in the process of dubbing (HDDyDVD). , The recorder was in the process of DV/ Digital8 Dubbing. Timer recording is not complete or did not start from the beginning. , There was a power failure during recording. If the power recovers when there is a timer recording, the recorder resumes recording. Should the power failure continue for more than 1 hour, reset the clock (page 81). , Disc space was not enough. Contents previously recorded were erased. , Data that is not playable on this recorder but was recorded on a DVD with a PC will be erased from the disc when the disc is inserted. , "Auto Title Erase" of the "Timer Settings" in the "Recording" setup is set to "On" (page 87). Recording from the equipment with a timer Nothing was recorded even though you set the Synchro-Rec setting correctly. , You forgot to turn off the connected equipment. Turn off the connected equipment and set the recorder to SynchroRec standby mode (page 50). , The recorder was not set to the SynchroRecording standby mode. Press c z SYNCHRO REC to have the recorder stand by for recording. Make sure the SYNCHRO REC indicator lights up on the front panel (page 50). , The equipment is not connected to the LINE IN 1 jacks of the recorder. , The recorder is connected to the TV output jack of the connected equipment. Recording does not stop immediately after you press x REC STOP. , It will take a few seconds for the recorder to input disc data before recording can stop. Recording does not stop after you press x STOP. , Press x REC STOP. Synchro-Recording does not complete. , The timer setting for the connected equipment overlapped the recorder's timer setting (page 51). , There was a power failure during the recording. Additional Information ,continued 95