Home » Sony Manuals » Remote Controls » Sony RM-VL610N » Manual Viewer

Sony RM-VL610N Operating Instructions - Page 26

While holding MUTING, pressed, press VOL + or, VOL -., Controlling the Volume of Visual

Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Controlling the Volume of Visual Components Connected to an Audio System (continued) 2 While holding MUTING pressed, press VOL + or VOL -. To set all volume controls to AMP Press VOL + while holding MUTING pressed. All Component Select buttons light up when you press these buttons, and then turn off when you release them. Press and while holding VOL+, press MUTING. To set only the audio components' volume controls to AMP Press VOL - while holding MUTING pressed. Only AMP lights up when you press these buttons, and then turns off when you release them. Press and while holding VOL-, press MUTING. Volume control setting complete. Volume control setting complete. Visual components are: TV, video cassette recorder, analog cable box, digital cable box, digital satellite tuner, DVD player, digital video recorder Audio components are: CD player, MD player, cassette deck, amplifier, DAV To cancel setting, press SET. Notes • If you used the Learning function to program the VOL +/- or MUTING buttons to send a signal to a component, the procedure above will not change the function of the VOL +/- and MUTING buttons. 26

Section	Page
Table of Contents	6
Getting Started	8
Installing the Batteries	8
When to replace the batteries	8
Location of Controls	9
Basic Operations	10
Setting the Code for non-Sony Preset Audio and Visual Components — Setting component codes	10
Setting a component code	10
Checking if the code number works	12
Setting a Component Code by the Search Function	13
Operating Your Components with the Remote Commander	14
To control the volume	15
Programming Signals of Another Remote Control — Learning Function	16
For accurate Learning	19
Programming remote control signals to the Component Select buttons and System Control buttons	20
Changing or erasing the function of a “learned” button	22
Notes on programming the signals for an air-conditioner	24
Advanced Features	25
Controlling the Volume of Visual Components Connected to an Audio System	25
Adding an Extra Function to the Component Select Buttons	27
Programming the Power-On Command of the Selected Component just by pressing that Component Select button (for Sony Components only)	27
Executing a Series of Commands — System Control Functions	29
To clear programmed commands	31
Programming a Series of Commands to on the Component Select Buttons	32
To clear programmed commands	33
Assigning Other Components to the Component Select Buttons	33
Using Other Functions	34
Locking the Controls — Hold Function	34
Erasing all settings — To reset the Commander to its factory settings	35
Additional Information	36
Precautions	36
Maintenance	36
Specifications	36
Troubleshooting	37
Appendixes	39
Table of Preset Functions	39
TV	39
VCR	40
CBL (Cable box)	40
SAT	41
DVD	42
DVR (Digital video recorder)	43
CD	44
MD	44
DECK	45
AMP	45
DAV (DVD/Receiver combo)	46
Digital TV TUNER	47