Sony RM-VL610N Operating Instructions - Page 32
Programming a Series of Commands to on the Component Select Buttons
View all Sony RM-VL610N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Programming a Series of Commands on the Component Select Buttons As with the SYSTEM CONTROL buttons, you can also program a series of operating commands for the Component Select buttons (up to 16 steps). To execute the commands programmed on a Component Select button by the System Control function, press the button for more than 2 seconds. 1 Press and while holding SET, press the VCR Component Select button. The SET indicator and the VCR Component Select button lights turn on. If a Control Program function (Component Macro) has already been set on the button, the button flashes twice. The setting procedure is automatically canceled. 2 Set the Control Program function. With this example, press the buttons in sequence as below: Notes • When you press the button for less than 2 seconds, it works as a normal Component Select button, and the programmed function does not work. • See also "Tips for programming the System Control functions" on page 31. Example: To program the procedure on page 29 for the VCR Component Select button 32 You can program up to 16 consecutive steps on each of the Component Select buttons, including the first step of pressing to select a Component Select button. 3 Press SET to complete the programming. The VCR Component Select button light turns off.