Home » Sony Manuals » Remote Controls » Sony RM-VL610N » Manual Viewer

Sony RM-VL610N Operating Instructions - Page 31

To clear programmed commands, Press and while holding, SET, press and hold

Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Executing a Series of Commands - System Control Functions (continued) Tips for programming the System Control functions The following information helps you to program a consecutive operation steps. About the order of operation steps Some of the components may not accept consecutive remote control signals. For example, some TVs generally may not respond to the next signal right after the Poweron signal. So, a series of commands such as TV Power-on and input select may not work properly. In this case, insert other signals to other components such as in the example below: TV Power-ontVCR Power-ont VCR playbacktTV input select To clear programmed commands 1 Press and while holding SET, press and hold for more than 3 seconds the SYSTEM CONTROL button you want to clear. 31

Section	Page
Table of Contents	6
Getting Started	8
Installing the Batteries	8
When to replace the batteries	8
Location of Controls	9
Basic Operations	10
Setting the Code for non-Sony Preset Audio and Visual Components — Setting component codes	10
Setting a component code	10
Checking if the code number works	12
Setting a Component Code by the Search Function	13
Operating Your Components with the Remote Commander	14
To control the volume	15
Programming Signals of Another Remote Control — Learning Function	16
For accurate Learning	19
Programming remote control signals to the Component Select buttons and System Control buttons	20
Changing or erasing the function of a “learned” button	22
Notes on programming the signals for an air-conditioner	24
Advanced Features	25
Controlling the Volume of Visual Components Connected to an Audio System	25
Adding an Extra Function to the Component Select Buttons	27
Programming the Power-On Command of the Selected Component just by pressing that Component Select button (for Sony Components only)	27
Executing a Series of Commands — System Control Functions	29
To clear programmed commands	31
Programming a Series of Commands to on the Component Select Buttons	32
To clear programmed commands	33
Assigning Other Components to the Component Select Buttons	33
Using Other Functions	34
Locking the Controls — Hold Function	34
Erasing all settings — To reset the Commander to its factory settings	35
Additional Information	36
Precautions	36
Maintenance	36
Specifications	36
Troubleshooting	37
Appendixes	39
Table of Preset Functions	39
TV	39
VCR	40
CBL (Cable box)	40
SAT	41
DVD	42
DVR (Digital video recorder)	43
CD	44
MD	44
DECK	45
AMP	45
DAV (DVD/Receiver combo)	46
Digital TV TUNER	47