Sony RMT-D165A Operating Instructions - Page 24

D Connecting to an AV amplifier (receiver) with a digital input jack having a Dolby Digital or DTS decoder and 6 speakers This connection will allow you to use the Dolby Digital or DTS decoder function of your AV amplifier (receiver). CD/DVD player COMPONENT Y PB PR VIDEO OUT PCM/DTS/ DOLBY DIGITAL COAXIAL DIGITAL OUT R AUDIO L LINE OUT LINE OUT VIDEO NORMAL PROGRESSIVE S VIDEO OUT D PCM/DTS/ DOLBY DIGITAL COAXIAL DIGITAL OUT to DIGITAL OUT (COAXIAL) Coaxial digital cord (not supplied) to coaxial digital input [Speakers] AV amplifier (receiver) having a decoder [Speakers] Rear (L) Subwoofer Front (L) Center Rear (R) l: Signal flow z Hint Use connection D when connecting to 7 or more speakers (6.1 ch or more). Notes • After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL" and "DTS" to "ON" in Quick Setup (page 25). 24 Front (R) • In order to listen to DTS sound tracks, you must use this connection. DTS sound tracks are not output through the LINE OUT L/R (AUDIO) jacks, even if you set "DTS" to "ON" in Quick Setup (page 25). • When you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency, set "48kHz/96kHz PCM" in "AUDIO SETUP" to "96kHz/24bit" (page 69).