Sony RMT-D165A Operating Instructions - Page 26
Enjoying the surround sound, effects
View all Sony RMT-D165A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Is this player connected to an amplifier (receiver) ? Select the type of jack you are using. YES LINE OUTPUT L/R (AUDIO) DIGITAL OUTPUT NO 9 Press X/x to select the type of jack (if any) you are using to connect to an amplifier (receiver), then press ENTER. Choose the item that matches the audio connection you selected on pages 21 to 24 ( A through D ). A • If you connect just a TV and nothing else, select "NO." Quick Setup is finished and connections are complete. B-1 C-1 • Select "LINE OUTPUT L/R (AUDIO)." Quick Setup is finished and connections are complete. B-2 C-2 D • Select "DIGITAL OUTPUT." The Setup Display for "DOLBY DIGITAL" appears. 10Press X/x to select the type of Dolby Digital signal you wish to send to your amplifier (receiver). Choose the signal that matches the audio connection you selected on pages 22 to 24 ( B through D ). AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM DTS: D-PCM 48kHz/96kHz PCM: DOLBY DIGITAL B-2 C-2 • D-PCM (page 69) D • DOLBY DIGITAL (only if the amplifier (receiver) has a Dolby Digital decoder) (page 69) 11Press ENTER. 26 "DTS" is selected. AUDIO SETUP AUDIO ATT: OFF AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND DIGITAL OUT: ON DOLBY DIGITAL: D-PCM DTS: OFF 48kHz/96kHz PCM: OFF ON 12Press X/x to select whether or not you wish to send a DTS signal to your amplifier (receiver). Choose the item that matches the audio connection you selected on pages 22 to 24 ( B through D ). B-2 C-2 • OFF (page 69) D • ON (only if the amplifier (receiver) has a DTS decoder) (page 69) 13Press ENTER. Quick Setup is finished. All connections and setup operations are complete. Enjoying the surround sound effects To enjoy the surround sound effects of this player or your amplifier (receiver), set the following items as described below for the audio connection you selected on pages 22 to 24 ( B through D ). Each of these is the default setting and does not need to be adjusted when you first connect the player. Refer to page 63 for using the Setup Display. Audio Connection (pages 21 to 24) A • No additional settings are needed. B-1 C-1 • Set "DOWNMIX" to "DOLBY SURROUND" (page 68) • If the sound distorts even when the volume is turned down, set "AUDIO ATT" to "ON" (page 68) B-2 C-2 D • Set "DOWNMIX" to "DOLBY SURROUND" (page 68) • Set "DIGITAL OUT" to "ON" (page 68)