Sony SLV-N70 Operating Instructions - Page 25

Getting Started 5 The TUNER PRESET menu appears. Set ANTENNA/CABLE to ANT and press OK. SET UP TUNER PRESET For details, see page 45. ANTENNA / CABLE ANT CABLE 6 The AUTO PRESET starts. SET UP TUNER PRESET AUTO PRESET PROCESSING SELECT : NEXT : OK CANCEL : EASY SET UP CH 2 4 SET UP SET UP IS DONE PLEASE WAIT Normal display You have now completed hookup. If you want to use the VCR Plus+ or VCR Plus+ GOLD system for recording, go to the pages listed below. For SLV-N80: Find the VCR Plus+ GOLD system Channel Listing in your program guide. For details, see page 51. Then enter all channels you want to record and the cable box output channel (usually 2, 3, or 4) as described on page 55. For SLV-N70: Go to page 58 for VCR Plus+ system channel set up. Automatic clock setting Once you've set up the VCR, it automatically sets the clock the first time you turn off the VCR. "ACS" (Auto Clock Set) will flash in the display window and search for a time signal provided by some TV channels. After that, whenever you turn off the VCR, it checks the time and adjusts the clock, even for Daylight Saving Time. To use the Auto Clock Set feature with this hookup, you need to manually select a channel that carries a time signal: 1 Tune the cable box to a channel that carries a time signal. 2 Select AUTO in the CLOCK SET menu to turn on the Auto Clock Set feature. 3 Turn off the VCR. It automatically sets the clock and adjusts for Daylight Saving Time by picking up the time signal. If you want to use the timer to record right away, or if the channels in your area do not carry time signals, set the clock manually. For details, see page 36. Notes • To use the Auto Clock Set feature, leave the cable box on. • If the clock is not set, "ACS" will flash in the display window whenever the VCR is turned off. During this time, the VCR will search for a time signal. Hookups 25