Sony SLV-N70 Operating Instructions - Page 8
Step 3 : Hookups - set up
View all Sony SLV-N70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Step 3 : Hookups Selecting the best hookup option There are many ways in which your VCR can be hooked up. To hook up your VCR so that it works best for you, first scan through the table below. Then use the accompanying diagrams and procedures on the following pages to set up your VCR. If your TV has audio/video inputs, refer to pages 9 and 10 for audio/video (A/V) hookup. Then follow one of the hookups below. For hookup 1 or 2, use the Sony RM-CM101 Cable Mouse (cable box controller) (not supplied). For SLV-N80 only If you have A cable box that is compatible with the Cable Mouse A digital broadcast service's digital satellite receiver that is compatible with the Cable Mouse Use Hookup 1 Hookup 2 Refer to Pages 11 to 13 Pages 14 to 16 For both SLV-N80 and N70 If you have Use No cable box or cable box with only a few Hookup 3 scrambled channels Antenna only, no cable TV Hookup 4 Cable box with many scrambled channels Hookup 5 Cable box with only a few scrambled Hookup 6 channels and you are using an A/B switch Refer to Pages 17 to 19 Pages 20 to 22 Pages 23 to 25 Pages 26 to 29 After you've completed the connections, follow the instructions for setup. During setup, if you need more details on the procedure described, page numbers are provided where you can find complete, step-by-step instructions. After you've completed the setup, you're ready to use your VCR. Procedures differ depending on the hookup you used. For an overview, refer to "Quick reference to using the VCR" on the back cover. Before you get started • Turn off the power to all equipment. • Do not connect the AC power cords until all of the connections are completed. • Be sure you make connections firmly. Loose connections may cause picture distortion. • If your TV doesn't match any of the examples provided, see your nearest Sony dealer or qualified technician. 8 Hookups