Sony SPP-A9276 Operating Instructions - Page 21
To change the access number, To activate/deactivate the Long Distance Saver function - price
View all Sony SPP-A9276 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Getting Started Notes • DO NOT USE (LONG DIST. SAVER) to dial EMERGENCY services, customer service numbers, your local telephone company, local numbers or toll free numbers. • If you press (LONG DIST. SAVER) twice, the dialing of the registered access number is cancelled and "[LONG DISTANCE]" disappears from the display. • If the access number is not correctly set, "SEND TO CORDLESS HANDSET FAILED." will appear on the display and five short error beeps will be heard after Jog Button (ENTER) is pressed in step 6. Move the cordless handset closer to the base phone, and then start over the procedure. • You can register up to 24 digits as an access number. To change the access number 1 Perform steps 1 and 3 on page 20. The current access number appears on the display. 2 Press (ERASE) to erase the current access number. 3 Enter a new access number using the dialing keys. 4 Press (PROGRAM). 5 Turn Jog Dial to choose "YES" to activate (LONG DIST. SAVER), and then press Jog Button (ENTER). You hear a long confirmation beep. To activate/deactivate the Long Distance Saver function 1 Perform steps 1 to 3 on page 19. 2 Turn Jog Dial to choose "LONG DISTANCE", and then press Jog Button (ENTER). 3 Turn Jog Dial to choose "ACTIVE" or "INACTIVE"(to deactivate), and then press Jog Button (ENTER). You hear a long confirmation beep. Notes • If you choose "INACTIVE" in step 3, (LONG DIST. SAVER) will be deactivated and you cannot use (LONG DIST. SAVER) even with a registered access number until the function is activated again. • Some Long Distance services may not be available in your state. Prices and conditions may vary. For details, contact your telephone company or your long distance provider. Some long distance call programs require a subscription with the carrier company before usage. • If it is not correctly set in "ACTIVE" or "INACTIVE", "SEND TO CORDLESS HANDSET FAILED." will appear on the display and five short error beeps will be heard after Jog Button (ENTER) is pressed in step 3. Move the cordless handset closer to the base phone, and then start over the procedure. Getting Started 21US