Sony SPP-A9276 Operating Instructions - Page 41
Changing a stored name and/or phone number, NUMBER
View all Sony SPP-A9276 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Enter successive numbers in the same way. When the phone number of 16 digits or more has been entered, the phone number appears in two lines. 7 Turn Jog Dial to choose "[PGM]", and then press Jog Dial. You hear a long confirmation beep, and the name and the number are stored. The display goes off. SONY 1234567890123456 12_ 0123456789*# F P VIP PGM Notes • Names cannot be entered using the dialing keys. • Do not allow more than 20 seconds to elapse during the operation procedure. Tips • When you select "[GO BACK]", you can return to the previous set display by pressing Jog Dial. • If you have entered a wrong name or number in step 4 or 6, turn Jog Dial to choose "[P]" then press Jog Dial or press (ERASE) to erase it. Then enter the correct name or number. • You may press (PROGRAM) instead of doing steps 5 and 7. • Phone numbers can be entered using the dialing keys in step 6. To store a number to be dialed via Private Branch Exchange (PBX) Before entering a phone number in step 6 on page 40, do as follows: 1 Enter the outside line access digit (e.g., 9). 2 Turn Jog Dial to choose "[P]" and then press Jog Dial, or press (REDIAL/PAUSE). Telephone Features Changing a stored name and/or phone number 1 Display the name you want to change by doing steps 1 to 3 on page 39. The cursor is at the right of the name. 2 Turn Jog Dial to choose "[P]", then press Jog Dial to erase the characters, and enter the new name. ENTER NAME SONY_ ABCDEFGHIJKLMNOP QRSTUVWXYZ SWITCH NUMBER If you want to change only the number, skip this step. continued Telephone Features 41US