Sony SPP-ID970 Operating Instructions - Page 13
Entering the area code, Step 4 - ringer
View all Sony SPP-ID970 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Getting Started Step 4 Entering the area code When you use this phone for the first time, or move to an area that has a different area code, you must enter your home area code. Otherwise, you cannot use some functions of this phone and the Caller ID functions. This is also necessary because the phone must be able to select an area code to properly dial call from the Caller ID list. Depending on your region, enter 3-digit area code as follows: Case 1. If 7-digit dialing (no area code) is accepted for local calls in your area, see "To enter your home area code" below. If you live in an area where calls from or to other local areas can also be made by 10-digit dialing (area code + number), you can register up to 5 local area codes with this telephone to take advantage of this system. See "To enter the local area code (For 10 digits phone number users)" on page 14. Case 2. If 10-digit dialing (area code + number) is required for all local calls in your area, at first, enter "000" in your home area code. See "To enter your home area code" below. Then see "To enter the local area code (For 10 digits phone number users)" on page 14. To enter your home area code Turn Press 1 Press (PGM). 2 Turn Jog Dial up to make "AREA" flash. DIRECTORY AREA RINGER 3 Press Jog Dial. HOME LOCAL 4 Press Jog Dial again. "ENTER AREA CODE" appears on the display. 5 Enter three digits of your home area code using the dialing keys. 6 Press (PGM). You will hear a long confirmation beep. continued Getting Started 13US