Sony SPP-ID970 Operating Instructions - Page 36

Using the Caller ID list (continued) Storing a number of the Caller ID list into the Phone Directory 1 Display the name and phone number you want to store from the Caller ID list (see page 32). 2 Confirm the number and press Jog Dial. SMITH JOHN 1-201-123-4567 DIAL PGM ERASE 1-201-123-4567 3 Turn Jog Dial up to make "PGM" flash and press Jog Dial. The cursor flashes at the end of the name. Enter or change the name, if necessary (see page 25). SMITH JOHN 12011234567 4 Press Jog Dial. The cursor flashes at the end of the phone number. Enter or change the phone number, if necessary (see page 25). SMITH JOHN 12011234567 5 Press Jog Dial again. You will hear a long confirmation beep and the name and number are stored. Notes • Do not allow more than 20 seconds to elapse between each step of the procedure. • If the number displayed in step 1 is not the one you should call back, you can change the number of digits of the phone number as described on page 37. • If the phone is connected to a Private Branch Exchange (PBX), you may need to add an outside line access digit. 36US Caller ID Features