Sony STR-DB840 Operating Instructions - Page 38
Customizing Sound Fields, Enjoying Surround Sound, Effect level EFFECT, Wall type WALL
View all Sony STR-DB840 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Enjoying Surround Sound Customizing Sound Fields By adjusting the surround parameters and the equalization of the front, rear and center speakers, you can customize the sound fields to suit your particular listening situation. Once you customize a sound field, the changes are stored in the memory indefinitely (unless the receiver is unplugged for about two weeks). You can change a customized sound field any time by making new adjustments to the parameters. See the table on page 41 for the parameters available in each sound field. To get the most from multi channel surround sound Position your speakers and do the procedures described in "Multi Channel Surround Setup" starting from page 19 before you customize a sound field. Adjusting the surround parameters The SUR menu contains parameters that let you customize various aspects of the current sound field. The settings available in this menu are stored individually for each sound field. 1 Start playing a program source encoded with multi channel surround sound. 2 Press SUR. The button lights up and the first parameter is displayed. 3 Press the cursor buttons ( or ) to select the parameter you want to adjust. 4 Turn the jog dial to select the setting you desire. The setting is entered automatically. Effect level (EFFECT) Initial setting : (depends on sound mode) This parameter lets you adjust the "presence" of the current surround effect. Wall type (WALL) Initial setting : midpoint When sound is reflected off soft material, such as a curtain, the high frequency elements are reduced. A hard wall is highly reflective and does not significantly effect the frequency response of the reflected sound. This parameter lets you control the level of the high frequencies to alter the sonic character of your listening environment by simulating a softer (S) or harder (H) wall. The midpoint designates a neutral wall (made of wood). Reverberation (REVERB) Initial setting : midpoint Before sound reaches our ears, it is reflected (reverberated) many times between he left and right walls, ceiling, and floor. In a large room, sound takes more time to bounce from one surface to another than in a smaller room. This parameter lets you control the spacing of the early reflections to simulate a sonically longer (L) or shorter (S) room. • The reverberation can be adjusted ±8 from S (short, -8) to L (long, +8) in 17 steps. • The midpoint (0) designates a standard room with no adjustment. Screen depth (SCREEN DEPTH) Initial setting : MID In a movie theater, sound seems to come from inside the image reflected on the movie screen. This parameter allows you to create the same sensation in your listening room by shifting the sound of the front speakers "into" the screen. • The screen depth can be set to OFF, MID, or DEEP. • DEEP provides the greatest amount of screen depth. Virtual speaker (VIR. SPEAKERS) Initial setting : ON Allows you turn the virtual speakers created by the CINEMA STUDIO EX. A, B, C and SEMI CINEMA STUDIO EX. A, B, C sound fields off or on. 38