Sony STR-DE897/S Operating Instructions - Page 37
Adjusting the equalizer, Advanced settings, Advanced Adjustments and Settings
View all Sony STR-DE897/S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Advanced Adjustments and Settings Adjusting the equalizer You can adjust the tonal quality (bass, treble level) of the front speakers using the EQUALIZER menu. 1 Start playing a source encoded with multi channel surround effects (DVD, etc.). 2 Press MAIN MENU repeatedly to select " EQUALIZER ". 3 Press or repeatedly to select the parameter you want to adjust. For details, see "EQUALIZER menu parameters" below. 4 While monitoring the sound, turn -/+ to select the setting you want. The setting is entered automatically. 5 Repeat steps 3 and 4 to adjust the other items. Note You cannot adjust the equalizer when the receiver is decoding signals with a sampling frequency of more than 48 kHz, or when DTS 96/24, DTS-ES Matrix or DTS Neo:6 decoding is applied. EQUALIZER menu parameters x BASS XXX.X dB (Front speaker bass level) x TREBLE XXX.X dB (Front speaker treble level) Initial setting: 0 dB You can adjust from -10 dB to +10 dB in 0.5 dB steps. x EQUALIZER XXX Initial setting: OFF Select "ON" to activate the equalizer. Note The EQ indicator in the display lights up when the equalizer is turned on. When you adjust the equalizer using the EQUALIZER parameters, the settings are applied to all sound fields and can be reproduced whenever you turn on the equalizer. Advanced settings Using the CUSTOMIZE menu to adjust the receiver You can adjust various receiver settings using the CUSTOMIZE menu. 1 Press MAIN MENU repeatedly to select " CUSTOMIZE ". 2 Press or repeatedly to select the parameter you want to adjust. For details, see "CUSTOMIZE menu parameters" below. 3 Turn -/+ to select the setting you want. The setting is entered automatically. 4 Repeat steps 2 and 3 to adjust the other items. CUSTOMIZE menu parameters The initial settings are underlined. x DTS 96/24 96/24 DEC XXXX (DTS 96/24 decoding mode) • AUTO When a DTS 96/24 signal is input, it is played back at 96 kHz sampling frequencies. • OFF Even when a DTS 96/24 signal is input, it is played back at 48 kHz sampling frequencies. Notes • This parameter is valid only in the A.F.D. mode (page 29). In other sound fields, this parameter is always set to "96/24 DEC OFF". • DTS 96/24 decoding is only valid in the A.F.D. mode (page 29). When the system is set to other sound fields, standard 48 kHz decoding is used. • Even when a DTS 96/24 signal is input, standard 48 kHz decoding is used if any speakers are set to "SMALL" or if the sub woofer is set to "NO". continued 37GB