Sony STR-DE897/S Operating Instructions - Page 53
Press M1 TV/SAT or M2 TAPE while the, ALT indicator turns on.
View all Sony STR-DE897/S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Operations Using the Remote RM-PG413 Tip If programming is unsuccessful, check the following: - If the indicator does not light up in step 1, the batteries are weak. Replace both batteries. - If the indicator lights up 4 times in quick succession in step 3, an error has occurred. Start again from step 1. To cancel programming Press RM SET UP during any step. The remote automatically exits the macro setting mode. To delay the output of an IR code Start over from step 1. In step 3, • Press M1 (TV/SAT) when the macro setting is M1. • Press M2 (TAPE) when the macro setting is M2. 1 second delay is programmed at this program step. The indicator lights up twice slowly, then the remote automatically exits the macro setting mode. To clear the programmed IR codes Clear each macro step individually. In step 3, • Press M1 (TV/SAT) when the macro setting is M1. • Press M2 (TAPE) when the macro setting is M2. The IR code is cleared. The indicator lights up twice slowly, then the remote automatically exits the macro setting mode. To start macro play Press M1 (TV/SAT) or M2 (TAPE) while the ALT indicator turns on. Note If the Macro Play function does not work properly, program a delay between each operation. See "To delay the output of an IR code". 53GB