Sony STR-DE897/S Operating Instructions - Page 47
Selecting the command mode of the remote, Press AV1 or AV2 while holding down RM, SET UP., Press
View all Sony STR-DE897/S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Operations Using the Remote RM-PG413 Remote Button H qs X qd x ea O qf V/v/B/b qf -/-- e; 2ND ql Operations Function VCR/ CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck Starts playback. VCR/ CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck Pauses playback or record. (Also start recording with components in record standby.) VCR/ CD player/ VCD player/ LD player/ DVD player/ MD deck/ DAT deck/ Tape deck Stops playback. VCD player/ Returns to the previous LD player/ menu or exits the menu. DVD player VCR/ Selects a menu item. Satellite tuner/ DVD player TV Selects the channel entry mode, either one or two digit. Remote Selects the command mode of the remote. Notes • Some functions explained in this section may not work depending on the model. • The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described. • To activate the buttons with orange printing, press ALT first before pressing the buttons. • When you press input buttons (VIDEO1, VIDEO2, VIDEO3 or DVD), the input mode of the TV might not switch to the corresponding input mode that you want. In this case, press TV/VIDEO button to switch the input mode of the TV. • The 2ND button on the remote is not available for receiver operation. Selecting the command mode of the remote Set the remote command mode using the RM SET UP button and the remote command mode buttons. Selecting the command mode You can switch the command mode (AV1 and AV2) of the remote. If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. Press AV1 or AV2 while holding down RM SET UP. The indicator flashes once (twice for AV2) , then the command mode switches. To check the command mode of the remote Press RM SET UP. You can check the remote by the indicator. Mode AV1 AV2 Indicator flashes once twice To reset the remote to factory settings Press ?/1, AV ?/1 and MASTER VOL - at the same time. The indicator flashes 3 times, then goes off. Note If the command mode of the receiver and the remote is different, you cannot use the remote to operate the receiver. To change the command mode of the receiver, see page 57. 47GB