Sony STR-K850P Operating Instructions - Page 48
Specifications continued
View all Sony STR-K850P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Specifications (continued) SA-WMSP85 for sub woofer AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 6 ohm loads, from 28 - 200 Hz; rated 100 watts, minimum RMS power, with no more than 0.8% total harmonic distortion from 250 milliwatts to rated output (Models of area code U only). Speaker system Active subwoofer, magnetically shielded Speaker unit Woofer: 20 cm cone type Enclosure type Acoustically loaded bass reflex Continuous RMS power output (6 ohms, 20 - 250 Hz) 100 W Reproduction frequency range 28 Hz - 200 Hz High frequency cut-off frequency 150 Hz Input LINE IN (input pin jacks) Power requirements Area code Power requirements U, CA 120 V AC, 60 Hz Power consumption 100 W Dimensions (w/h/d) Approx. 10 3/4 × 12 7/8 × 15 3/4 inches including front panel Mass 22 lb 1 oz Supplied accessories FM wire antenna (1) AM loop antenna (1) Speaker connecting cord, long (2) Speaker connecting cord, short (3) Monaural connecting cord (1 phono to 1 phono) (1) Coaxial digital cord (1) Foot pads (speakers) (20) Foot pads (subwoofer) (4) Remote commander (1) R6 (size -AA) batteries (2) Speakers • Front speakers (2) • Surround speakers (2) • Center speaker (1) • Sub woofer (1) For details on the area code of the component you are using, see page 4. Design and specifications are subject to change without notice. 48US