Sony VPL-PX10 Operating Instructions - Page 38
Cleaning the Air Filter, projector lamp in the same way as a fluorescent lamp.
View all Sony VPL-PX10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Maintenance Notes • Be sure to use an LMP-P202 Projector Lamp for replacement. If you use lamps other than the LMPP202, the projector may malfunction. • Be sure to turn off the projector and unplug the power cord before replacing the lamp. • Do not put your hands into the lamp replacement socket, and do not allow any liquid or objects to fall into it to avoid electrical shock or fire. Disposal of the used lamp As the used lamp contains Mercury, dispose of the lamp according to local, state or federal laws. As the materials used in this lamp are similar to those of a fluorescent lamp, you should dispose of a used projector lamp in the same way as a fluorescent lamp. 5 Hook the air filter on the holders of the air filter cover, then set the filter and replace the cover. Notes • If the dust cannot be removed from the air filter, replace the air filter with the supplied new one. • Be sure to attach the air filter cover firmly; the power cannot be turned on if it is not closed securely. • Place the air filter so that it fits in a notch on the air filter cover. To clean the ventilation holes When you clean the air filter, clean the ventilation holes (intake, rear and bottom) also. Remove the dust from the outside of the ventilation holes with a vacuum cleaner. Cleaning the Air Filter The air filter should be cleaned every 300 hours. When it becomes difficult to remove the dust from the filter, replace the filter with a new one. To clean the air filter, follow the steps below: 1 Turn off the power and unplug the power cord. 2 Remove the air filter cover at the bottom of the projector. 3 Remove the air filter. 4 Wash the air filter with a mild detergent solution and dry it in a shaded place. 38 (GB)