Sony WAHTSA1 Operating Instructions - Page 11

Note • If you perform the pairing operation between the surround amplifier and another S-AIR main unit, sound transmission established by the ID is canceled. • Pairing will not be canceled unless you change the ID setting. Tip • To press the PAIRING button, a slim instrument, such as a paper clip, can be used. Attaching the cover to the surround amplifier After connecting, you can attach the cover to the surround amplifier to organize and store excess speaker cords. 1 Attach the speaker cord cover by sliding it down along the grooves on the edges of the surround amplifier. Speaker cord cover 2 Insert the tabs of the speaker cord holder in the slots of the speaker cord cover, and press it into place. Speaker cord holder Surround amplifier m Surround amplifier Grooves Push the speaker cord cover down until you hear a click. Turn the surround amplifier upside down, and store the cords in the speaker cord cover. Note • When detaching, remove the speaker cord holder, then remove the speaker cord cover. To remove the speaker cord holder, slightly press the catch of the holder and lift off. To remove the speaker cord cover, slightly splay open the edges of the cover and slide down. • Do not use excessive force to store the cords. 11US