Sony WAHTSA1 Operating Instructions - Page 4

About This Operating, Instructions, Overview - speaker

Page 4 highlights

• Use caution when placing the system on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result. • Allow adequate air circulation to prevent internal heat buildup. • Do not place the system on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation slots. • Do not install the system near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock. • Do not install the system in an inclined position. It is designed to be operated in a horizontal position only. • Keep the system away from equipment with strong magnets, such as microwave ovens, or large loudspeakers. • Do not place heavy objects on the system. • If you use more than one set of S-AIR products, position them away from each other to avoid cross talk. • Install this surround amplifier and S-AIR products at least 50 cm away from people. • To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. • Do not place the system on carpet, as discoloration may result. • If you use more than one surround amplifier, do not place one on top of the other. On cleaning Clean the cabinets only with a soft dry cloth. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzene. Safety • If anything falls into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further. • Unplug the unit from the wall outlet (mains) if you do not intend to use it for an extended period of time. To disconnect the cord, pull it out by the plug, never by the cord. Overview This surround amplifier allows you to use a 5.1 channel system (five speakers and one subwoofer) or 7.1 channel system (seven speakers and one subwoofer). Enjoying a 5.1 channel system S-AIR can avoid cluttered cords to keep your room tidy. B A H C E D I About This Operating Instructions WAHT-SA1 is a surround amplifier for Sony S-AIR products. The amplifier is for models that have an "EZW-RT10" or "EZW-T100" slot on their rear panel. 4US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

4
US
Use caution when placing the system on a
specially treated (waxed, oiled, polished, etc.)
floor, as staining or discoloration may result.
Allow adequate air circulation to prevent
internal heat buildup.
Do not place the system on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation slots.
Do not install the system near heat sources such
as radiators or air ducts, or in a place subject to
direct sunlight, excessive dust, mechanical
vibration or shock.
Do not install the system in an inclined position.
It is designed to be operated in a horizontal
position only.
Keep the system away from equipment with
strong magnets, such as microwave ovens, or
large loudspeakers.
Do not place heavy objects on the system.
If you use more than one set of S-AIR products,
position them away from each other to avoid
cross talk.
Install this surround amplifier and S-AIR
products at least 50 cm away from people.
To prevent fire or shock hazard, do not place
objects filled with liquids, such as vases, on the
apparatus.
Do not place the system on carpet, as
discoloration may result.
If you use more than one surround amplifier, do
not place one on top of the other.
On cleaning
Clean the cabinets only with a soft dry cloth. Do
not use any type of abrasive pad, scouring powder
or solvent such as alcohol or benzene.
Safety
If anything falls into the cabinet, unplug the unit
and have it checked by qualified personnel
before operating it any further.
Unplug the unit from the wall outlet (mains) if
you do not intend to use it for an extended period
of time. To disconnect the cord, pull it out by the
plug, never by the cord.
WAHT-SA1 is a surround amplifier for
Sony S-AIR products. The amplifier is for
models that have an “EZW-RT10” or
“EZW-T100” slot on their rear panel.
This surround amplifier allows you to use a
5.1 channel system (five speakers and one
subwoofer) or 7.1 channel system (seven
speakers and one subwoofer).
Enjoying a 5.1 channel
system
S-AIR can avoid cluttered cords to keep
your room tidy.
About This Operating
Instructions
Overview
A
B
D
I
E
H
C