Symphonic CSDV840E Owner's Manual - Page 6
Setup
View all Symphonic CSDV840E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Hint for Cable Box or Satellite Box Connection A (Cable box or Satellite box) IN OUT Cable Signal (Back of DVD/VCR) ANT-IN RF Cable ANT-OUT (supplied) E (Back of TV) Connection B (Back of DVD/VCR) Cable Signal ANT-IN (Cable box or Satellite box) ANT-OUT E IN OUT RF Cable (supplied) RF Cable (Back of TV) Select this connection when you want to view or record a scram- Select this connection when you want to change channels on the bled channel. With this connection, channels cannot be changed DVD/VCR. With this connection, you may watch one channel on the DVD/VCR. You can view or record ONLY the channels you while recording another. have selected on the cable box or the satellite box. • You may not view or record a scrambled channel. • While you are recording, only the recorded channel can be viewed. To select channels of the cable box or satellite box To select channels of the cable box or satellite box 1) At the cable box or satellite box, select channel 3 or 4 (the same channel as the DVD/VCR's RF output channel.) 1) Turn on the DVD/VCR by pressing the POWER button, and • Refer to "RF Output Channel". then, press the VCR/TV button.The "POWER" light on the front 2) At the TV, select the same channel as the output channel (3 or panel will appear. Then, press the CHANNEL buttons to select 4) of the cable box or satellite box. channel 3 or 4 (the same channel as the output channel of the 3) Turn on the DVD/VCR by pressing the POWER button, and cable b ox or satellite box). then, press the VCR/TV button. The "POWER" light on the front • If you use the channel 4, you need to change the DVD/VCR's panel will appear. Then, select the channel you want to view or RF output to channel 4. Refer to "RF Output Channel". record. 2) At the TV, select channel 3 or 4 (the same channel as you To play back a tape have selected at step 1). Follow the steps 1) to 2) above. Then, play back a tape. 3) At the cable box or satellite box, select the channel you want to • Refer to "Playback" on page 11. view or record. To view one channel while recording another 1) While you are recording on the DVD/VCR, press the VCR/TV button. 2) At the cable box or satellite box, select the channel you want to view. Connection to an Audio System Setup AUDIO Method 1 Stereo system Analog audio input jacks L R Audio cable (supplied) DVD/VCR (Analog) AUDIO OUT DVD/VCR VCR AUDIO OUT L AUDIO IN R VIDEO OUT VIDEO IN or DIGITAL AUDIO OUT DVD AUDIO OUT S-VIDEO OUT COMPONENT VIDEO OUT Y L CB COAXIAL R CR Method 2 Dolby Digital decoder, MD deck or DAT deck COAXIAL Digital audio input jack Audio Coaxial Digital cable (commercially available) DIGITAL AUDIO OUT DIGITAL AUDIO OUT DVD AUDIO OUT S-VIDEO OUT COMPONENT VIDEO OUT Y L CB COAXIAL R CR Note • If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder, and set "DOLBY DIGITAL" to "ON" in the AUDIO menu. (Refer to pages 20-21.) • The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT deck. • Unless connected to a Dolby Digital decoder, set "DOLBY DIGITAL" to "OFF" in the AUDIO menu. Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers. (Refer to pages 20-21.) • Set "DOLBY DIGITAL" to "OFF" in the AUDIO menu for connecting to an MD deck or DAT deck. (Refer to pages 2021.) • By hooking this unit up to a Multi-channel Dolby Digital decoder, you can enjoy high-quality 5.1ch Dolby Digital surround sound as heard in the movie theaters. -6- EN